View DSHG-01_3142273.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

directional controls e general information x p y no.1 solenoid controlled pilot up to 31.5 mpa (4570 psi), 1100l/min (291 u.s.gpm) pub. ec-0404 pilot operated directional valves operated directional valves DSHG-01/03/04/06/10 directional valves dmg-01/03/04/06/10 in these valves, the nominal size "04" can provide 300 l/min (79.3 u.s.gpm), "06" can provide 500 l/min (132 u.s.gpm) and "10" can provide 1100 l/min (291 u.s.gpm) in the maximum flow respectively and they can also withstand such a high pressure as 31.5 mpa {4570 psi} as the maximum operating pressure. with these features of high pressure and high flow, the valves can make the size or configuration of the equipment compact. low pressure drop as the pressure drop of each size of the valve becomes minimal, the more of energy saving of the equipment is possible. easy change of pilot and drain system the change of the pilot from external to internal and the change of the drain from internal to external or viceversa can be done easily by putting on or removing the relevant plug on the valve. dhg/04/06/10 dmt-03/06/10 these valves perform a change over of spool by hydraulic pilot and shift the direction of oil flow. these valves may be used to manually shift the spool position and change the direction of oil flow. solenoid contorolled pilot operated valves ............................ page 4 pilot operated directional valves ............................ page 34 manually operated directional valves ............................ page 40 manually operated thease valves are composed of a solenoid operated pilot valve and a pilot operated slave valve. when a solenoid is energised the pilot valve directs the flow to move the spool of the slave valve, thus changing the direction of flow in the hydraulic circuit. high pressure high flow
directional controls solenoids / mounting mounting mounting surface dimensions confrom to iso 4401, hydraulic fluild power-four-port directional control valves- mounting surfaces. model numbers iso code of mounting surface DSHG-01 dmg-01 dmg-03 dshg-03 (s)-dshg-04 dhg-04 dmg-04 (s)-dshg-06 dhg-06 dmg-06 (s)-dshg-10 dhg-10 dmg-10 iso 4401-ab-03-4-a iso 4401-ac-05-4-a iso 4401-ac-05-4-a iso 4401-ad-07-4-a iso 4401-ae-08-4-a iso 4401-af-10-4-a (only for solenoid controlled pilot operated directional valves) no.2 solenoid controlled pilot operated directional valves pilot operated directional valves manually operated directional valves solenoid connectors (din connector) solenoids the solenoid connectors are conform to the international standard iso 4400 (fluid power systems and components- three-pin electrical plug connectors-characteristics and requirements). the main ports conform to iso 4401-ac-05-4-a. the pilot and drain ports conform to the iso. ac solenoids 50-60 hz common service solenoids do not require rewiring when the applied frequency is changed. dc solenoids (reputable k-series) these dc solenoids have surge absorbers for k-series functions. the three advantages of them are as mentioned below:- since surge voltage can be controlled to a very low figure, electric control devices, such as a computer, can be used without any interference like noise. there being no spark between contacts, the life of the relay becomes longer. time lag for spool return after de-energisation of the solenoid is very short. r type solenoids these are rectifier and surge absorber incorporated direct current solenoids which can be used by connecting directly to the ac power source. they have, like other dc solenoids, such advantages that the sound in on-off operation is quite low and the coils are hardly burnt out even if the spool is stuck at the half way of its changeover for contaminant parti-cles etc. moreover, they can be used almost permanently without being affected by a surge voltage from the outside. thus, they are the solenoids of high reliability and durability. insulation class of solenoid class h 1. 2. 3.
directional controls e hydraulic fluids / instructions water containing fluids synthetic fluids petroleum base oil type of fluids use water-glycol fluids or w/o emulsion fluids. use phosphate ester or polyol ester fluid.when phosphate ester fluid is used, prefix "f-" to the model number because the special seals (fluororubber) are required to be used. use fluids equivalent to iso vg32 or vg46. remarks 0 50 120 150 1 2 34 0 0 100 200 300 400 500 0 10 20 30 mpa psi 1bf. drain line back pressure n operating force sol a sol b l' l no.3 solenoid controlled pilot operated directional valves pilot operated directional valves manually operated directional valves fluid types hydraulic fluids any type of hydraulic fluid, listed in the table below can be used. note) for two types of manually operated directional valves, dmt-06, 06x and dmt-10, 10x, only petroleum base oils and polyol ester type fluids are available. for use with hydraulic fluids other than those listed above, consult your yuken representatives in advance. always be sure to use hydraulic fluids within the stipulated conditions shown below: 2 viscosity: 15 to 400 mm /s (77 to 1800 ssu), temperature: -15 to +70 c (5 to 160 f) due caution must be paid to maintaining control over contamination of the hydraulic fluids which may otherwise lead to breakdowns and shorten the life of the valve. please maintain the degree of contamination within nas 1638-grade 12. use 25 m or finer line filter. control of contamination recommended viscosity and oil temperatures mounting posture instructions in case no-spring detent type and no-spring type valves are used in the solenoid de-energised state, install the valve in such a way that the axis l-l' becomes horizontal to get the detent effect firmly. for the valve types other than the above, there are no restrictions on the mounting posture. solenoid energisation in no-spring type, either solenoid of the two should be ener- gised continuously to avoid malfunction. for double solenoid valves do not energise both at the same time as it will result in coils burning out. valve tank port avoid connecting the valve tank port to a line with possible surge pressure. piping end of tank line should be submerged in oil. shockless type in order to benefit from a shockless operation, it is necessary to fill the drain line with operating oil. only after the tank line has been filled with operating oil, start the operation of the valve on a regular basis. operating force for manual override push pin please note that as the back pressure of the drain line rises, manually override push pin turns hard to operate (see the graph below). pilot drain port for solenoid controlled pilot operated directional valve avoid connecting the valve pilot drain port to a line with possible surge pressure. piping end of drain should be submerged in oil. 1: 2:
directional controls 2 1 1. 2. 3. specifications 3 3 specifications valve type max. flow l/min (u.s.gpm) max. operating pressure mpa(psi) max. pilot pressure mpa(psi) min required pilot pres. mpa(psi) ext.drain int.drain max. t-line back pressure mpa(psi) ac dc r max. change- over frequency -1 min (cycles/min) approx. mass kg(1bs.) model numbers DSHG-01-3c ? - ? -13/1380/1390 DSHG-01-2b ? - ? -13/1380/1390 dshg-03-3c ? - ? -13/1390 dshg-03-2n ? - ? -13/1390 dshg-03-2b ? - ? -13/1390 (s-)dshg-04-3c ? - ? -51/5190 (s-)dshg-04-2n ? - ? -51/5190 (s-)dshg-04-2b ? - ? -51/5190 (s-)dshg-06-3c ? - ? -52/5290 (s-)dshg-06-2n ? - ? -52/5290 (s-)dshg-06-2b ? - ? -52/5290 (s-)dshg-06-3h ? - ? -52/5290 (s-)dshg-10-3c ? - ? -42/4290 (s-)dshg-10-2n ? - ? -42/4290 (s-)dshg-10-2b ? - ? -42/4290 (s-)dshg-10-3h ? - ? -42/4290 40 (10.6) 160 (42.3) 300 (79.3) 500 (132) 1100 (291) 21 (3050) 25 (3630) 31.5 (4570) 31.5 (4570) 31.5 (4570) 21 (3050) 25 (3630) 25 (3630) 25 (3630) 21 (3050) 25 (3630) 21 (3050) 1.0 (150) 0.7 (100) 0.8 (120) 0.8 (120) 1.0 (150) 1.0 (150) 16 (2320) 16 (2320) 21 (3050) 21 (3050) 21 (3050) 16 (2320) 16 (2320) 16 (2320) 16 (2320) 16 (2320) 120 120 120 120 110 120 100 60 120 120 120 120 110 120 100 60 120 120 120 120 110 100 100 50 3.5 (7.7) 2.9 (6.4) 7.2(15.9) 7.2(15.9) 6.6(14.6) 8.8(19.4) 8.8(19.4) 8.2(18.1) 12.7 (28) 12.7 (28) 12.1 (27) 13.5 (30) 45.3(100) 45.3(100) 44.7 (99) 53.1(117) standard type shockless type model numbers rated flow l/min (u.s.gpm) max. pressure mpa (psi) dshf-10- ??? - ? -27 ? dshf-16- ??? - ? -37 ? dshf-24- ??? - ? -28 ? dshf-32- ??? - ? -27 ? 315 (83) (132) (317) (634) 500 1200 2400 21 (3050) no.4 solenoid controlled pilot operated directional valves DSHG-01/03/04/06/10 s-dshg-04/06/10 sub-plate mounting the maximum flow means the limited flow without inducing any abnormality to the operation (changeover) of the valve. for details, please refer to the "list of standard models and maximum flow" on pages 9 to 13. in case of internal drain type valve, the differential pressure between pilot pressure and back pressure at tank port should be kept more than the minimum pilot pressure. the minimum pilot pressure for the valve with pilot piston is 1.8 mpa (260 psi). yuken can offer flanged connection valves described below. consult yuken for the details.
directional controls e solenoid ratings / sub-plates valve type electric source coil type frequency (hz) source rating voltage (v) serviceable range inrush (a) holding (a) power (w) current & power at rated voltage 100 100 110 120 200 200 220 240 12 24 48 100 200 50 60 50 60 50 60 50 60 50/60 a100 a120 a200 a240 d12 d24 d48 r100 r200 80 - 110 90 - 120 96 - 132 108 - 144 160 - 220 180 - 240 192 - 264 216 - 288 10.8 - 13.2 21.6 - 26.4 43.2 - 52.8 90 - 110 180 - 220 2.42 2.14 2.35 2.02 1.78 1.21 1.07 1.18 1.01 0.89 0.51 0.37 0.44 0.42 0.31 0.25 0.19 0.22 0.21 0.15 2.45 1.23 0.61 0.33 0.16 ac dc (k series) ac dc rectified (r) standard type shockless type 29 29 valve model numbers japanese standard "jis" sub-plate model numbers thread size approx. mass kg (1bs.) sub-plate model numbers thread size approx. mass kg (1bs.) european design standard sub-plate model numbers thread size approx. mass kg (1bs.) n. american design standard dsgm-01-30 dsgm-01x-30 dsgm-01y-30 rc 1/8 dsgm-03-40 dsgm-03x-40 dsgm-03y-40 dhgm-03y-10 dhgm-04-20 dhgm-04x-20 dhgm-06-50 dhgm-06x-50 dhgm-10-40 dhgm-10x-40 rc 1/4 rc 3/8 rc 3/8 rc 1/2 rc 3/4 rc 3/4 rc 1/2 rc 3/4 rc 3/4 rc 1 rc 1-1/4 rc 1-1/2 4.7 0.8 0.8 0.8 3.0 3.0 (10.4) (1.8) (1.8) (1.8) (6.6) (6.6) 4.7 (10.4) 4.4 (9.7) 4.1 (9.0) 7.4 (16.3) 7.4 (16.3) 21.5 (47.4) 21.5 (47.4) dsgm-01-3080 dsgm-01x-3080 dsgm-03-2180 dsgm-03x-2180 dsgm-03y-2180 dhgm-03y-1080 dhgm-04-2080 dhgm-04x-2080 dhgm-06-5080 dhgm-06x-5080 dhgm-10-4080 dhgm-10x-4080 1/8 bsp.f 1/4 bsp.f 3/8 bsp.f 1/2 bsp.f 3/4 bsp.f 3/4 bsp.f 1/2 bsp.f 3/4 bsp.f 3/4 bsp.f 1 bsp.f 1-1/4 bsp.f 1-1/2 bsp.f 0.8 (1.8) 0.8 (1.8) 3.0 (6.6) 3.0 (6.6) 4.7 (10.4) 4.4 (9.7) 4.1 (9.0) 8.5 (18.7) 8.5 (18.7) 4.7 (10.4) 21.5 (47.4) 21.5 (47.4) dsgm-01-3090 dsgm-01x-3090 dsgm-01y-3090 dsgm-03-2190 dsgm-03x-2190 dsgm-03y-2190 dhgm-03y-1090 dhgm-04-2090 dhgm-04x-2090 dhgm-06-5090 dhgm-06x-5090 dhgm-10-4090 dhgm-10x-4090 1/8 npt 1/4 npt 3/8 npt 3/8 npt 1/2 npt 3/4 npt 3/4 npt 1/2 npt 3/4 npt 3/4 npt 1 npt 1-1/4 npt 1-1/2 npt 0.8 (1.8) 0.8 (1.8) 3.0 (6.6) 3.0 (6.6) 4.7 (10.4) 4.4 (9.7) 4.1 (9.0) 7.4 (16.3) 7.4 (16.3) 4.7 (10.4) 21.5 (47.4) 21.5 (47.4) 0.8 (1.8) DSHG-01 dshg-03 dshg-04 dshg-06 dshg-10 no.5 solenoid controlled pilot operated directional valves DSHG-01/03/04/06/10 s-dshg-04/06/10 solenoid ratings inrush current in the above table show rms values at maximum stroke. the coil type numbers in the shaded column are handled as optional extras. in case these coils are required to be chosen, please confirm the time of delivery with us before ordering. sub-plates dsgm-03 ? is available only for internal pilot-intern al drain type (use dhgm-03y for other valves). sub-plates are available. specify the sub-plate model number from the table above. when sub-plates are not used, the mounting surface should have a good machined finish. csa approved solenoid valve the "dshg" series valve have been approved by the csa(candian standards association). consult us for details.
directional controls 1 1 1 1 1 1 2 2 2 2 2 2 5 4 1. 2. 3. 4. 5. model number designation 3 f- s- dshg -06 -2 b2 a -c2 -e t -r2 -a100 -c -h -n -52 -l - ? design standard models with reverse mtg. of solenoid design number type of elec- trical conduit connection bult-in orifice for pilot line manual override of pilot valve coil type spool control modification (omit if not required) special seals type drain connec- tion pilot connec- tion models with pilot choke valve special two position valve spool type spool-spring arrangement no. of valve position valve size series number f: for phos- phate ester type fluids none: stand- ard type s: shock- less type none: stand- ard type dsgh: solenoid controlled pilot operated direction- al valve, sub-plate mounting 01 03 04 06 10 3 2 3 2 3 2 3 2 c: spring centred b: spring offset n: no-spring c: spring centred b: spring offset n: no-spring c: spring centred b: spring offset n: no-spring c: spring centred b: spring offset h: pressure centred 2, 3, 4 40, 5, 60 7, 9, 10 11, 12 2, 3, 4 40, 7 2, 3, 4 40, 5, 60 7, 9, 10 11, 12 2 3 4 40 7 none: internal pilot e: external pilot none: external drain t: internal drain l (omit if not required) l (omit if not required) l (omit if not required) l (omit if not required) none: japanese standard "jis" 90: n. american design standard none: japanese standard "jis" & european design standard 90: n. american design standard 80: european design standard (applicable only for DSHG-01) 13 13 51 52 42 none: terminal box type n: plug-in connector type n1: plug-in connector with indicator light h: refer to none: manual override pin c: push button & lock nut ac: a100 , a200 a120 , a240 dc: d12 , d24 d48 ac dc r100 , r200 ac: a100 , a200 a120 , a240 dc: d12 , d24 d48 ac dc r100 , r200 r2: with stroke adjustment, both ends ra: with stroke adjustment, port "a" end rb: with stroke adjustment, port "b" end r2: with stroke adj., both ends ra: with stroke adj., port "a" end rb: with stroke adj., port "b" end p2: with pilot piston, both ends pa: pb: with pilot piston, port "a" end with pilot piston, port "b" end omit if not required a b (omit if not required) c1: with c1 choke c2: with c2 choke c1c2: with c1 & c2 choke omit if not required a (omit if not required) a b (omit if not required) 2, 4, 40 60, 10, 12 3, 5, 6 7, 9, 11 2, 4, 40 (3, 7) 2, 4, 40 (3, 7) 2, 4, 40 (3, 7) 2, 4, 40 (3, 7) 2, 4, 40 60, 10, 12 3, 5, 6 7, 9, 11 a (omit if not required) pilot connection internal pilot external pilot (e) drain connection external drain internal drain (t) external drain internal drain (t) care in application hold back pressure in the tank line so that the difference between pilot pressure and drain pressure is always more than minimum required pilot pressure. combination is not applicable no restrictions in the combination on us solenoid controlled pilot operated directional valves no.6 DSHG-01 / 03 / 04 / 06 / 10 s-dshg-04 / 06 / 10 model number designation shckless type (s-dshg) are not available for spool type marked ( ). in spool-spring arrangement "h" (pressure centred models), the valves with stroke adjustment (r ? ) and pilot-piston (p ? ) are not available. n1 stands for plug-in connector with solenoid indicator light. n1 is not available for r-type solenoids. in spool-spring arrangement "h" (pressure centred models), in case the pilot pressure is more than 10 mpa (1450 psi), please specify that the valve should have the bu ilt-in orifice to the pilot line. note : in spool type "3", "5", "6", "60", and "7", the combination applicable between pilot system and drain system is as described in the table below. as for the details of the valve using the neutral position and the side position (either sol a or sol b side), please refer to page 14. furthermore, the spool types other than "2", "4", "40" (3, 7) are also available. in the table above, the symbols and numbers highlighted with shade represent the optional extras. the valves with model number having such optional extras are handles as options, therefore please confirm the time of delivery with us before ordering.
directional controls 1. 3 1 2 1 2 2. 3. e mounting bolt model numbers name japanese standard "jis" european design standard n. american design standard qty. tightening torque nm (in. 1bs.) mouting bolt mtg. bolt kit soc. hd. cap screw soc. hd. cap screw soc. hd. cap screw soc. hd. cap screw DSHG-01 dshg-03 (s-)dshg-04 (s)-dshg-06 (s)-dshg-10 mbk-01-01-30 mbk-01-02-30 m6 35 lg. m6 45 lg. m10 50 lg. m12 60 lg. m20 75 lg. mbk-01-01-3090 mbk-01-02-3090 1/4-20 unc 1-3/4 lg. 1/4-20 unc 1-3/4 lg. 3/8-16 unc 2 lg. 1/2-13 unc 2-1/2 lg. 3/4-10 unc 3 lg. 1 set 4 2 4 6 6 5 12 12 58 100 473 - - - - - - 6 15 15 72 123 585 (43 (104 (104 (504 (868 (4106 - - - - - - 52) 130) 130) 625) 1068) 5078) model numbers mbk-01-01-30 mbk-01-02-30 mbk-01-01-3090 mbk-01-02-3090 ( ( ( ( 94 134 94 134 ) ) ) ) 3.70 5.28 3.70 5.28 a mm (in.) " b " thd. m5 no.10-24 unc 8.5 dia. (.33) 9 (.35) a 9 (.35) " b " thd. 9 (.35) 15 (.59) 4 (.16) " b " thd. both ends no.7 solenoid controlled pilot operated directional valves DSHG-01/03/04/06/10 s-dshg-04/06/10 for internal pilot-internal drain. mounting bolt for external pilot or external drain. mounting bolt kit is common to that of 01 series modular valves. refer to figure below for the dimensions of bolt kit. stud bolt nut dimensions in millimetres (inches)
directional controls options (.7) (1.1) (1.3) (4.1) c1, c2 c1c2 p2 pa pb p2 pa pb model with pilot choke adj. models with pilot piston models with stroke adj. model numbers dshg-03 (s-)dshg-04 (s-)dshg-06 (s-)dshg-10 0.65(1.4) 0.65(1.4) 0.65(1.4) 0.65(1.4) 1.3(2.9) 1.3(2.9) 1.3(2.9) 1.3(2.9) 1.0(2.2) 3.6(7.9) 0.5(1.1) 1.8(4.0) 0.6(1.3) 1.0(2.2) 1.2(2.6) 3.7(8.2) 0.3 0.5 06 1.85 kg (1bs.) ba p y ab t b a p y a b t a b pt a y b v w a b pt a y b v ab p t a y b w choke c2 choke c1 choke c2 choke c1 ab pt y v x b a ab p t v x b a y ab pt b a y a b pt b a y a b pt b a y no.8 solenoid controlled pilot operated directional valves DSHG-01/03/04/06/10 s-dshg-04/06/10 models with pilot choke adjustment options when the adjustment screw is turned clockwise, changeover speed of the main spool becomes slow. in case of the spring centred valves in particular, making slow of the returning speed of the main spool to the neutral position is possible with a c2 choke valve. these choke valves can be used in combination with the valves of spring centred, no-spring, offset, pressure centred and the valves with stroke adjustment. models with pilot piston(p2, pa, pb) the valves with a pilot piston can be used when the high speed changeover of the main spool is required. however, please not that in case of spring centered valves, there is no change in the returning speed of the main spool to the neutral position even with the pilot piston. graphic symbols (ex.: spring centred) "pb" models graphic symbols (ex.: spring centred) DSHG-01,06,10 dshg-03, 04 "pa" models "p2" models pressure centred models (3h ? ) the pressure centered type can be used when the returning of the main spool to the neutral position is required to be firmily. models with stroke adjustment (r2, ra, rb) when the adjustment screw is screwed in , the main spool stroke becomes short and flow rate reduces. "rb" models "ra" models "r2" models graphic symbols (ex.: spring centred) graphic symbols (ex.: external pilot-external drain) (only for 3h6, 3h60) additional mass of options add the mass described below to the mass of standard models on page 4, if options are required. options on pilot valve the same options to dsg-01 series valves are available. please refer to the catalogue no. pub. ec-0402 for the details.
directional controls e list of standard models and maximum flow b ab pt y p t y a b a b 40 (10.6) 40 (10.6) 40 (10.6) 40 (10.6) 40 (10.6) 40 (10.6) 40 (10.6) 40 (10.6) 40 (10.6) 40 (10.6) 40 (10.6) DSHG-01-3c2 DSHG-01-3c3 DSHG-01-3c4 DSHG-01-3c40 DSHG-01-3c5 DSHG-01-3c60 DSHG-01-3c7 DSHG-01-3c9 DSHG-01-3c10 DSHG-01-3c11 DSHG-01-3c12 DSHG-01-2b2 DSHG-01-2b3 DSHG-01-2b4 DSHG-01-2b40 DSHG-01-2b7 "2" "3" "4" "40" "5" "60" "7" "9" "10" "11" "12" 40 (10.6) 40 (10.6) 40 (10.6) 40 (10.6) 40 (10.6) 40 (10.6) 40 (10.6) 40 (10.6) 40 (10.6) 40 (10.6) 40 (10.6) 40 (10.6) 40 (10.6) 40 (10.6) 40 (10.6) 40 (10.6) 40 (10.6) 40 (10.6) 40 (10.6) 40 (10.6) 40 (10.6) 40 (10.6) 40 (10.6) 40 (10.6) 40 (10.6) 40 (10.6) 40 (10.6) 40 (10.6) 40 (10.6) 40 (10.6) 40 (10.6) 40 (10.6) 40 (10.6) 40 (10.6) 40 (10.6) 40 (10.6) 40 (10.6) 7 mpa (1020 psi) 14 mpa (2030 psi) 21 mpa (3050 psi) 7 mpa (1020 psi) 14 mpa (2030 psi) 21 mpa (3050 psi) model numbers model numbers graphic symbol graphic symbol maximum flow l/min (u.s.gpm) maximum flow l/min (u.s.gpm) spring centred spring centred three positions two positions spool type no.9 solenoid controlled pilot operated directional valves DSHG-01 a p t b b a notes ) max. flow shows value at pilot pressure more than 1 mpa (150 psi) 1. max. flow in the table above represents the value in the flow condition of p a b t (or p b a t) as shown in the circuit diagram right. in case the valve is used in the condition that either a or b port is blocked, the maximum flow differs according to a hydraulic circuit, therefore, please consult us for details. 2.
directional controls list of standard models and maximum flow b ab pt y b a b p t y a pt y a b ab dshg-03-2n2 dshg-03-2n3 dshg-03-2n4 dshg-03- 2n40 160 (42.3) 160 (42.3) 160 (42.3) 160 (42.3) 160 (42.3) dshg-03-2b2 dshg-03-2b3 dshg-03-2b4 dshg-03-2b40 dshg-03-2b7 "2" "3" "4" "40" "7" 160 (42.3) 160 (42.3) 160 (42.3) 160 (42.3) 160 (42.3) 160 (42.3) 160 (42.3) 160 (42.3) 160 (42.3) 160 (42.3) 160 (42.3) 160 (42.3) 160 (42.3) 160 (42.3) 160 (42.3) 7 mpa (1020 psi) 14 mpa (2030 psi) 25 mpa (3630 psi) model numbers maximum flow l/min (u.s.gpm) no-spring spool type 7 mpa (1020 psi) 14 mpa (2030 psi) 25 mpa (3630 psi) maximum flow l/min (u.s.gpm) model numbers graphic symbol graphic symbol spring offset dshg-03-3c2 dshg-03-3c3 dshg-03-3c4 dshg-03-3c40 dshg-03-3c5 dshg-03-3c60 dshg-03-3c7 dshg-03-3c9 dshg-03-3c10 dshg-03-3c11 dshg-03-3c12 7 mpa (1020 psi) 14 mpa (2030 psi) 25 mpa (3630 psi) model numbers maximum flow l/min (u.s.gpm) spring centred spool type graphic symbol 160 (42.3) 160 (42.3) 160 (42.3) 160 (42.3) 160 (42.3) 160 (42.3) 160 (42.3) 160 (42.3) 160 (42.3) 160 (42.3) 160 (42.3) "2" "3" "4" "40" "5" "60" "7" "9" "10" "11" "12" 85 160 (22.5) (42.3) 85 160 85 160 85 160 85 160 85 160 (22.5) (42.3) (22.5) (42.3) (22.5) (42.3) (22.5) (42.3) (22.5) (42.3) 85 160 85 160 85 160 85 160 85 160 (22.5) (42.3) (22.5) (42.3) (22.5) (42.3) (22.5) (42.3) (22.5) (42.3) 85 160 85 160 85 160 85 160 85 160 85 160 85 160 85 160 (22.5) (42.3) (22.5) (42.3) (22.5) (42.3) (22.5) (42.3) (22.5) (42.3) (22.5) (42.3) (22.5) (42.3) (22.5) (42.3) 125 160 60 95 60 95 60 95 60 95 60 95 (33.0) (42.3) (15.9) (25.1) (15.9) (25.1) (15.9) (25.1) (15.9) (25.1) (15.9) (25.1) 60 95 (15.9) (25.1) 60 95 60 95 (15.9) (25.1) (15.9) (25.1) 60 95 (15.9) (25.1) 160 (42.3) 160 (42.3) 160 (42.3) no.10 solenoid controlled pilot operated directional valves dshg-03 three positions two positions a p t b b a 85 (22.5) 160 (42.3) 160 (42.3) notes: the relation between max. flow and pilot pressure in the table above is as shown below. 1. 2. (example) maximum flow rate is constant regardless of pilot pressure. pilot pressure more than 0.7 mpa (100 psi). pilot pressure at 0.7 mpa (100 psi). pilot pressure at 1 mpa (150 psi). max. flow in the table above represents the value in the flow condition of p a b t (or p b a t) as shown in the circuit diagram right. in case the valve is used in the condition that either a or b port is blocked, the maximum flow differs according to a hydraulic circuit, therefore, please consult us for details.
directional controls e list of standard models and maximum flow b a b p t y a b ab pt y pt y a b ab dshg-04-2n2 dshg-04-2n3 dshg-04-2n4 dshg-04- 2n40 dshg-04-2b2 dshg-04-2b3 dshg-04-2b4 dshg-04-2b40 dshg-04-2b7 "2" "3" "4" "40" "7" 300 (79.3) 300 (79.3) 300 (79.3) 300 (79.3) 300 (79.3) maximum flow l/min (u.s.gpm) no-spring spool type model numbers (s-) (s-) (s-) (s-) (s-) (s-) model numbers graphic symbol 10 mpa (1450 psi) 16 mpa (2320 psi) 25 mpa (3630 psi) 31.5 mpa (4570 psi) maximum flow l/min (u.s.gpm) spring offset 300 (79.3) 300 (79.3) 300 (79.3) 300 (79.3) 300 (79.3) 300 (79.3) 300 (79.3) 300 (79.3) 300 (79.3) 300 (79.3) 300 (79.3) 300 (79.3) 300 (79.3) 300 (79.3) 300 (79.3) 300 (79.3) 300 (79.3) 300 (79.3) 300 (79.3) 300 (79.3) 300 (79.3) 300 (79.3) 300 (79.3) 300 (79.3) 300 (79.3) 300 (79.3) 300 (79.3) 300 (79.3) 300 (79.3) 300 (79.3) 300 (79.3) 300 (79.3) 300 (79.3) 300 (79.3) 300 (79.3) "2" "3" "4" "40" "5" "6" "60" "7" "9" "10" "11" "12" model numbers maximum flow l/min (u.s.gpm) spool type graphic symbol spring centred 10 mpa (1450 psi) 16 mpa (2320 psi) 25 mpa (3630 psi) 31.5 mpa (4570 psi) 10 mpa (1450 psi) 16 mpa (2320 psi) 25 mpa (3630 psi) 31.5 mpa (4570 psi) (s-) dshg-04-3c2 dshg-04-3c2 (s-) (s-) dshg-04-3c4 dshg-04-3c4 dshg-04-3c40 dshg-04-3c40 dshg-04-3c3 dshg-04-3c5 dshg-04-3c6 (s-) dshg-04-3c60 dshg-04-3c60 dshg-04-3c7 dshg-04-3c9 (s-) dshg-04-3c10 dshg-04-3c10 (s-) dshg-04-3c12 dshg-04-3c12 dshg-04-3c11 300 (79.3) 300 (79.3) 300 (79.3) 300 (79.3) 300 (79.3) 300 (79.3) 300 (79.3) 250 (66.1) 300 (79.3) 300 (79.3) 300 (79.3) 300 (79.3) 300 (79.3) 300 (79.3) 300 (79.3) 300 (79.3) 300 (79.3) 300 (79.3) 300 (79.3) 300 (79.3) 300 (79.3) 300 (79.3) 300 (79.3) 250 (66.1) 300 (79.3) 300 (79.3) 300 (79.3) 250 (66.1) 250 (66.1) 140 (37.0) 200 (52.8) 120 (31.7) 165 (43.6) 110 (29.1) 145 (38.3) 110 (29.1) 260 (68.7) 245 (64.7) 245 (64.7) 245 (64.7) 300 (79.3) 300 (79.3) 235 (62.1) 200 (52.8) 145 (38.3) 250 (66.1) 280 (74.0) 260 (68.7) 160 (42.3) 140 (37.0) 280 (74.0) 250 (66.1) 170 (44.9) 120 (31.7) 135 (35.7) 110 (29.1) 300 (79.3) 250 (66.1) 200 (52.8) 120 (31.7) 150 (39.6) 110 (29.1) 300 (79.3) 250 (66.1) 200 (52.8) 120 (31.7) 145 (38.3) 110 (29.1) graphic symbol no.11 solenoid controlled pilot operated directional valves dshg-04 / s-dshg-04 notes: max flow described above shown value at pilot pressure more than 0.8 mpa (120 psi). 1. a p t b b a two positions three positions max. flow in the table above represents the value in the flow condition of p a b t (or p b a t) as shown in the circuit diagram right. in case the valve is used in the condition that either a or b port is blocked, the maximum flow differs according to a hydraulic circuit, therefore, please consult us for details. 2.
directional controls list of standard models and maximum flow b ab p t y a b ab pt y pt y a b ab p t y a b ab v "2" "3" "4" "40" "7" maximum flow l/min (u.s.gpm) no-spring spool type graphic symbol dshg-06-2n2 dshg-06-2n3 dshg-06-2n4 dshg-06- 2n40 500 (132) 500 (132) 500 (132) 500 (132) 500 (132) (s-) (s-) (s-) model numbers 10 mpa (1450 psi) 16 mpa (2320 psi) 25 mpa (3630 psi) 31.5 mpa (4570 psi) dshg-06-2b2 dshg-06-2b3 dshg-06-2b4 dshg-06-2b40 dshg-06-2b7 model numbers (s-) (s-) (s-) maximum flow l/min (u.s.gpm) spring offset 10 mpa (1450 psi) 16 mpa (2320 psi) 25 mpa (3630 psi) 31.5 mpa (4570 psi) graphic symbol "2" "3" "4" "40" "5" "6" "60" "7" "9" "10" "11" "12" model numbers maximum flow l/min (u.s.gpm) spool type graphic symbol spring centred 10 mpa (1450 psi) 16 mpa (2320 psi) 25 mpa (3630 psi) 31.5 mpa (4570 psi) (s-)dshg-06-3c2 dshg-06-3c3 dshg-06-3c4 dshg-06-3c40 dshg-06-3c5 dshg-06-3c6 dshg-06-3c60 dshg-06-3c7 dshg-06-3c9 dshg-06-3c10 dshg-06-3c11 dshg-06-3c12 500 (132) 500 (132) 500 (132) 500 (132) 500 (132) 500 (132) 500 (132) 500 (132) 500 (132) 500 (132) 500 (132) 500 (132) 500 (132) 500 (132) 500 (132) 500 (132) 500 (132) 500 (132) 500 (132) 500 (132) 500 (132) 500 (132) 500 (132) 500 (132) 500 (132) 500 (132) 500 (132) 500 (132) 500 (132) 500 (132) 500 (132) 500 (132) 500 (132) 500 (132) 500 (132) 10 mpa (1450 psi) 16 mpa (2320 psi) 25 mpa (3630 psi) 31.5 mpa (4570 psi) model numbers maximum flow l/min (u.s.gpm) graphic symbol pressure centred (s-) (s-) (s-) (s-) (s-) (s-)dshg-06-3h2 dshg-06-3h3 dshg-06-3h4 dshg-06- 3h40 dshg-06-3h5 dshg-06-3h6 dshg-06- 3h60 dshg-06-3h7 dshg-06-3h9 dshg-06- (s-) (s-) (s-) (s-) (s-) 500 (132) 500 (132) 500 (132) 500 (132) 500 (132) 475 (125) 475 (125) 500 (132) 500 (132) 500 (132) 500 (132) 500 (132) 500 (132) 500 (132) 500 (132) 500 (132) 500 (132) 390 (103) 420 (111) 500 (132) 500 (132) 500 (132) 500 (132) 500 (132) 500 (132) 500 (132) 500 (132) 500 (132) 500 (132) 500 (132) 500 (132) 500 (132) 500 (132) 500 (132) 500 (132) 500 (132) 500 (132) 500 (132) 500 (132) 500 (132) 500 (132) 500 (132) 500 (132) 500 (132) 500 (132) 500 (132) 500 (132) 500 (132) 500 (132) 500 (132) 500 (132) 500 (132) 500 (132) 500 (132) 500 (132) 500 (132) 500 (132) 500 (132) 500 (132) 500 (132) 425 (112) 300 (79.3) 340 (89.8) 450 (119) 350 (92.5) 230 (60.8) 280 (74.0) 360 (95.1) 460 (122) 370 (97.8) 500 (132) 500 (132) 500 (132) 410 (108) 500 (132) 310 (81.9) 500 (132) 310 (81.9) 500 (132) 310 (81.9) 500 (132) 410 (108) 500 (132) 410 (108) 500 (132) 450 (119) 500 (132) 410 (108) 500 (132) 410 (108) 500 (132) 410 (108) 500 (132) 360 (95.1) 500 (132) 310 (81.9) 500 (132) 310 (81.9) 500 (132) 310 (81.9) 500 (132) 460 (122) 500 (132) 460 (122) 500 (132) 460 (122) 500 (132) 420 (111) 500 (132) 420 (111) 500 (132) 470 (124) 500 (132) 420 (111) 500 (132) 420 (111) 500 (132) 420 (111) 500 (132) no.12 solenoid controlled pilot operated directional valves dshg-06 / s-dshg-06 a p t b b a 410 (108) 500 (132) 500 (132) notes: the relation between max. flow and pilot pressure in the table above is as shown below. 1. 2. (example) maximum flow rate is constant regardless of pilot pressure. pilot pressure more than 0.8 mpa (120 psi). in case pressure centred models, pilot pressure is more than 1 mpa (150 psi). pilot pressure at 0.8 mpa (120 psi). in case pressure centred models, pilot pressure is more than 1 mpa (150 psi) pilot pressure at 1.5 mpa (220 psi). two positions three positions max. flow in the table above represents the value in the flow condition of p a b t (or p b a t) as shown in the circuit diagram right. in case the valve is used in the condition that either a or b port is blocked, the maximum flow differs according to a hydraulic circuit, therefore, please consult us for details.
directional controls e list of standard models and maximum flow two positions b ab p t y a b ab pt y pt y a b ab p t y a b ab v model numbers maximum flow l/min (u.s.gpm) spool type graphic symbol spring centred 10 mpa (1450 psi) 16 mpa (2320 psi) 25 mpa (3630 psi) 31.5 mpa (4570 psi) 16 mpa (2320 psi) 25 mpa (3630 psi) 31.5 mpa (4570 psi) model numbers maximum flow l/min (u.s.gpm) graphic symbol pressure centred "2" "3" "4" "40" "5" "6" "60" "7" "9" "10" "11" "12" (s-)dshg-10-3c2 dshg-10-3c3 dshg-10-3c4 dshg-10-3c40 dshg-10-3c5 dshg-10-3c6 dshg-10-3c60 dshg-10-3c7 dshg-10-3c9 dshg-10-3c10 dshg-10-3c11 dshg-10-3c12 (s-) (s-) (s-) (s-) (s-) 1100 (291) 1100 (291) 1100 (291) 1100 (291) 1100 (291) 1050 (277) 1050 (277) 1100 (291) 1100 (291) 1100 (291) 1100 (291) 1100 (291) (s-)dshg-10-3h2 dshg-10-3h3 dshg-10-3h4 dshg-10- 3h40 dshg-10-3h5 dshg-10-3h6 dshg-10- 3h60 dshg-10-3h7 dshg-10-3h9 dshg-10- (s-) (s-) (s-) (s-) (s-) 950 (251) 1100 (291) "2" "3" "4" "40" "7" maximum flow l/min (u.s.gpm) no-spring spool type graphic symbol dshg-10-2n2 dshg-10-2n3 dshg-10-2n4 dshg-10- 2n40 (s-) (s-) (s-) model numbers 16 mpa (2320 psi) 25 mpa (3630 psi) 31.5 mpa (4570 psi) dshg-10-2b2 dshg-10-2b3 dshg-10-2b4 dshg-10-2b40 dshg-10-2b7 model numbers (s-) (s-) (s-) maximum flow l/min (u.s.gpm) spring offset 16 mpa (2320 psi) 25 mpa (3630 psi) 31.5 mpa (4570 psi) graphic symbol 10 mpa (1450 psi) 1100 (291) 1100 (291) 1100 (291) 1100 (291) 1100 (291) 880 (232) 940 (248) 1100 (291) 1100 (291) 1100 (291) 1100 (291) 1100 (291) 1100 (291) 1100 (291) 1100 (291) 1100 (291) 1100 (291) 1100 (291) 1100 (291) 1100 (291) 1100 (291) 1100 (291) 1100 (291) 1100 (291) 1100 (291) 1100 (291) 1100 (291) 1100 (291) 1100 (291) 1100 (291) 1100 (291) 1100 (291) 1100 (291) 1100 (291) 1100 (291) 1100 (291) 1100 (291) 1100 (291) 1100 (291) 1100 (291) 1100 (291) 1100 (291) 1100 (291) 1100 (291) 1100 (291) 1100 (291) 1100 (291) 1100 (291) 750 (198) 1100 (291) 1060 (280) 895 (236) 950 (251) 1100 (291) 950 (251) 1100 (291) 750 (198) 1100 (291) 750 (198) 1100 (291) 980 (259) 700 (185) 785 (207) 850 (225) 570 (151) 680 (180) 1040 (275) 1100 (291) 870 (230) 1100 (291) 950 (251) 1100 (291) 950 (251) 1100 (291) 950 (251) 1100 (291) 1040 (275) 870 (230) 750 (198) 1100 (291) 750 (198) 1100 (291) 750 (198) 1100 (291) 1060 (280) 1100 (291) 1060 (280) 1100 (291) 1060 (280) 1100 (291) 1100 (291) 1100 (291) 970 (256) 1100 (291) 1050 (277) 1100 (291) 970 (256) 1100 (291) 970 (256) 1100 (291) 1000 (264) 1100 (291) 970 (256) 1100 (291) 970 (256) 1100 (291) 10 mpa (1450 psi) 10 mpa (1450 psi) 1100 (291) 1100 (291) 1100 (291) 1100 (291) 1100 (291) 1100 (291) 1100 (291) 1100 (291) 1100 (291) 1100 (291) 1100 (291) 1100 (291) 1100 (291) 1100 (291) 1100 (291) 1100 (291) 1100 (291) 1100 (291) 1100 (291) 1100 (291) 1100 (291) 1100 (291) 1100 (291) 1100 (291) 1100 (291) 1100 (291) 1100 (291) 1100 (291) 1100 (291) 1100 (291) 1100 (291) 1100 (291) 1100 (291) 1100 (291) 1100 (291) 1100 (291) 1100 (291) 1100 (291) 1100 (291) 1100 (291) no.13 solenoid controlled pilot operated directional valves dshg-10 / s-dshg-10 a p t b b a 1040 (275) 1100 (291) 1100 (291) notes ) the relation between max. flow and pilot pressure in the table above is as shown below. 1. 2. (example) maximum flow rate is constant regardless of pilot pressure. pilot pressure more than 1 mpa (150 psi). pilot pressure at 1 mpa (150 psi). pilot pressure at 1.5 mpa (220 psi). three positions max. flow in the table above represents the value in the flow condition of p a b t (or p b a t) as shown in the circuit diagram right. in case the valve is used in the condition that either a or b port is blocked, the maximum flow differs according to a hydraulic circuit, therefore, please consult us for details.
directional controls reverse mtg. of sol. / special 2-position valve ab t p y b b a pt y a ab t p y b b a pt y a ab y pt ab standard mtg. reverse mtg. type standard mtg. reverse mtg. type standard mtg. graphic symbols graphic symbols graphic symbols model numbers model numbers model numbers 04 06 10 dshg- -2b ? a 04 06 10 dshg- -2b ? b 04 06 10 dshg- -2n ? a dshg- ? -2b2a (s-) dshg- ? -2b3a dshg- ? -2b4a (s-) dshg- ? -2b40a (s-) dshg- ? -2b5a dshg- ? -2b6a dshg- ? -2b60a (s-) dshg- ? -2b7a dshg- ? -2b9a dshg- ? -2b10a (s-) dshg- ? -2b11a dshg- ? -2b12a (s-) dshg- ? -2b2b (s-) dshg- ? -2b3b dshg- ? -2b4b (s-) dshg- ? -2b40b (s-) dshg- ? -2b5b dshg- ? -2b6b dshg- ? -2b60b (s-) dshg- ? -2b7b dshg- ? -2b9b dshg- ? -2b10b (s-) dshg- ? -2b11b dshg- ? -2b12b (s-) dshg- ? -2n2a (s-) dshg- ? -2n3a dshg- ? -2n4a (s-) dshg- ? -2n40a (s-) dshg- ? -2n5a dshg- ? -2n6a dshg- ? -2n60a (s-) dshg- ? -2n7a dshg- ? -2n9a dshg- ? -2n10a (s-) dshg- ? -2n11a dshg- ? -2n12a (s-) y pt a b b y t p b a a sol b sol a standard mtg. of solenoid reverse mtg. of solenoid ("l") no.14 solenoid controlled pilot operated directional valves DSHG-01 / 03 / 04 / 06 / 10 s-dshg-04 / 06 / 10 a b pt a b y a b p y t b a b y pt b 2b2a 2b2b (example) in case of spool type "2" "a": use of neutral and sol. a energised position sol. a energised position sol. b energised position neutral position "b": use of neutral and sol. b energised position valves using neutral position and side position. (special two position valve) besides the use of the standard 2-position valves aforementioned in the "list of standard models and maximum flow", the 3-position valves also can be used as the 2-position valves using the two of their three positions. in this case, there are two kinds of the valve available. one is the valve using the neutral position and sol a position (2b ? a) and another is the valve using the neutral position and sol b position (2b ? b). reverse mounting of solenoid. in spring offset type, it is a standard configuration that the solenoid is mounted onto the valve in the sol b position (side). however, in this particular spool-spring arrangement, the mounting of the solenoid onto the valve in the reverse position - sol a side - is also available. the graphic symbol for this reverse mounting is as shown below. as for the valve type 2b ? a and 2b ? b, please refer to the explanation under the heading of "valves using neutral position and side position" given below.
directional controls e preessure drop spool type p a b t p b a t p t pressure drop curve numbers spool type p a b t p b a t p t pressure drop curve numbers 3 4 3 3 3 3 2 2 2 2 2 2 3 4 3 3 3 3 2 1 1 3 4 3 3 3 2 2 2 2 2 3 4 3 3 3 2 2 2 2 2 2 3 4 40 5 60 7 9 10 11 12 2 2 2 2 2 2 spool type p a b t p b a t p t pressure drop curve numbers spool type p a b t p b a t p t pressure drop curve numbers 3 5 3 3 6 3 3 5 5 3 3 3 4 5 4 4 4 4 4 2 1 3 6 3 6 3 3 3 5 3 3 4 6 4 4 4 4 4 4 4 6 2 3 4 40 5 60 7 9 10 11 12 4 6 6 4 6 4 spool type p a b t p b a t p t pressure drop curve numbers spool type p a b t p b a t p t pressure drop curve numbers 5 5 5 5 7 5 4 3 3 4 4 3 5 7 5 1 7 5 5 5 6 5 4 4 2 4 7 5 5 5 5 7 6 6 6 6 2 3 4 40 5 6 7 9 10 11 12 spool type p a b t p b a t p t pressure drop curve numbers spool type p a b t p b a t p t pressure drop curve numbers 2 2 2 2 3 4 2 2 2 6 2 2 4 2 2 6 2 2 7 4 5 2 4 40 60 10 12 4 5 6 60 5 5 5 5 5 6 5 5 6 5 6 5 4 5 5 2 2 mpa psi pressure drop p l/min u.s.gpm flow rate 1 2 3 4 0 10 20 30 40 1.4 1.2 0.8 0.4 1.0 0.6 0.2 0 200 160 120 80 40 0 246810 0 mpa psi pressure drop p l/min u.s.gpm flow rate 40 80 120 160 2.0 1.6 1.2 0.8 0.4 300 0 10 20 30 40 0 0 3 4 5 6 2 1 250 200 150 100 50 0 mpa psi pressure drop p l/min u.s.gpm flow rate 180 0 20 40 60 80 0 160 120 80 40 no.15 solenoid controlled pilot operated directional valves DSHG-01/03/04 s-dshg-04 2 pressure drop curves based on viscosity of 35 mm /s (164 ssu) and specific gravity of 0.850. 1 2 3 4 5 6 7 0 100 150 200 50 250 300 1.2 0.8 0.4 DSHG-01 dshg-03 dshg-04, s-dshg-04 0 DSHG-01 dshg-03 dshg-04 s-dshg-04
directional controls pressure drop spool type p a b t p b a t p t pressure drop curve numbers spool type p a b t p b a t p t pressure drop curve numbers 8 6 8 8 8 5 5 4 5 5 4 3 8 6 8 8 5 5 4 1 1 6 6 6 8 8 5 4 5 5 4 6 6 6 8 5 7 2 3 4 40 5 6 7 9 10 11 12 7 60 8 5 8 1 7 7 7 7 4 7 7 7 7 7 spool type p a b t p b a t p t pressure drop curve numbers spool type p a b t p b a t p t pressure drop curve numbers 6 6 8 1 2 5 6 6 8 6 8 8 2 5 5 6 8 8 3 2 4 40 10 12 2 60 1 2 7 7 7 spool type p a b t p b a t p t pressure drop curve numbers spool type p a b t p b a t p t pressure drop curve numbers 9 7 9 9 9 5 6 6 6 6 6 3 9 7 9 9 8 5 5 1 2 8 7 7 9 9 5 6 6 5 6 8 7 7 9 8 5 2 3 4 40 5 6 7 9 10 11 12 8 60 9 7 9 3 7 6 8 6 2 7 8 8 7 6 spool type p a b t p b a t p t pressure drop curve numbers spool type p a b t p b a t p t pressure drop curve numbers 8 8 9 3 5 6 8 8 9 8 9 9 4 5 7 8 9 9 4 2 4 40 10 12 4 60 2 6 8 8 6 viscosity ssu factor 0.81 0.87 0.96 1.03 1.09 1.14 1.19 1.23 77 98 141 186 232 278 324 371 2 mm /s 15 20 30 40 50 60 70 80 1.27 417 90 1.30 464 100 1 2 3 4 5 6 7 8 9 0 200 400 600 800 2.0 1.6 1.2 0.8 0.4 1 2 3 4 5 6 7 8 0 100 200 300 400 500 2.0 1.6 1.2 0.8 0.4 psi pressure drop p l/min u.s.gpm flow rate 300 250 200 150 50 0 20 60 80 100 120 0 0 140 40 100 mpa 1000 1100 psi pressure drop p l/min u.s.gpm flow rate 300 250 200 150 50 0 50 150 0 300 100 100 mpa 200 250 0 no.16 solenoid controlled pilot operated directional valves dshg-06, 10 / s-dshg-06, 10 dshg-06, s-dshg-06 dshg-10, s-dshg-10 dshg-06 s-dshg-06 dshg-10 s-dshg-10 for any other viscosity, multiply the factors in the table below. for any other specific gravity (g'), the pressure drop ( p') may be obtained from the formula right. p' = p(g'/0.850)
directional controls e typical changeover time pilot pressure sol"off" sol"on" 3c ? sol"on","off" 2b ? 2n ? 250 200 150 100 50 5101520 25 sol"off" sol"on" 3c ? 2n ? sol"on" 2b ? sol"off" 150 100 50 5101520 25 sol"off" sol"on" 3c ? 2n ? sol"on" 2b ? sol"off" 150 100 50 5101520 25 3000 2000 1000 0 3600 mpa psi ms changeover time 0 0 pilot pressure 3000 2000 1000 0 3600 mpa psi ms changeover time 0 0 pilot pressure 3000 2000 1000 0 3600 mpa psi changeover time 0 0 ms no.17 solenoid controlled pilot operated directional valves dshg-04/06/10 changeover time varies according to oil viscosity, spool type and hydraulic circuit. dshg-04 test conditions coil type : d ? (models with dc solenoids) voltage : rated voltage 2 oil viscosity : 35 mm /s (164 ssu) dshg-10 dshg-06
directional controls mounting surface: iso 4401-ab-03-4-a installation drawing sub-plate model numbers dsgm-01-30 dsgm-01-3080 dsgm-01-3090 dsgm-01x-30 dsgm-01x-3080 dsgm-01x-3090 dsgm-01y-30 dsgm-01y-3090 piping size " c " thd. rc 1/8 1/8 npt rc 1/4 rc 3/8 1/4 bsp.f 1/4 npt 3/8 npt " d " thd. m5 no. 10-24 unc m5 no. 10-24 unc m5 no. 10-24 unc " e " mm (in.) 10 (.39) 12 (.47) 10 (.39) 12 (.47) 10 (.39) 12 (.47) 1/8 bsp.f model numbers DSHG-01- ??? - ? -13 DSHG-01- ??? - ? -1390 "c" thd. g 1/2 1/2 npt rc 1/4 1/4 npt "d" thd. a t p b sol b sol a sol b sol a 12.7(.50) 30.2 (1.19) 40.5 (1.59) 14.2 (.56) 0.75 (.03) 15.5 (.61) 8.5 (.33) 7.5 (.30) 7 (.28) dia. 4 places " d " thd. " e " deep 4 places 21.5 (.85) 5.2 (.20) 25.8 (1.02) 31 (1.22) 31.75 (1.25) 48 (1.89) 63 (2.48) 71 (2.80) 85 (3.35) 7 (.28) 7 (.28) dia. through 11 (.43) dia. spotf ace 2 places 15 (.59) 16 (.63) 32 (1.26) 11 (.43) 24 (.94) 37 (1.46) 12.5 (.49) 35.5 (1.40) 58.5 (2.30) " c " thd. 4 places 40.5 (1.59) space needed to remove solenoid-each end ac : dc,r : 45.5 (1.79) 55 (2.17) cylinder port "b" pressure port "p" cylinder port "a" ac : dc,r : 191.4 (7.54) 210 (8.27) ac : dc,r : 74.2 (2.92) 83.5 (3.29) tank port "t" solenoid indicator light 31 (1.22) 32.5 (1.28) 130.3 (5.13) manual actuator 6(.24) dia. 48 (1.89) 112 (4.41) 78 (3.07) 65 (2.56) 43.5 (1.71) 125 (4.92) ac : dc,r : 158.2 (6.23) 167.5 (6.59) electrical conduit connection "c" thd. (both ends) 90 (3.54) 0.5 (.02) 0.75 (.03) double solenoid models only mounting surf ace (o-rings furnished) pilot drain port "y" "d" thd. pilot pressure port "x" "d" thd. 60 (2.36) 105 (4.13) 118 (4.65) 152 (5.98) 170.3 (6.70) no.18 solenoid controlled pilot operated directional valves DSHG-01 sub- plates terminal box type: DSHG-01- ??? - ? -13/1390 internal pilot - internal drain external pilot - external drain external pilot - internal drain internal pilot - external drain for other dimensions, refer to "internal pilot internal drain". dimensions in millimetres (inches) dsgm-01 ? -30/3080/3090
directional controls e mounting surface: iso 4401-ab-03-4-a installation drawing model numbers DSHG-01- ??? - ? -n ? -13 DSHG-01- ??? - ? -n ? - 1380 "j" thd. rc 1/4 1/4 bsp.f 1/4 npt model numbers dimensions mm (inches) cdefhj l 130 (5.12) 141 (5.55) 144 (5.67) 53 (2.09) 64 (2.52) 57.2 (2.25) 27.5 (1.08) 27.5 (1.08) 34 (1.34) 39 (1.54) 39 (1.54) 53 (2.09) 170 (6.69) 181 (7.13) 184 (7.24) 74.2 (2.92) 83.5 (3.29) 191.4 (7.54) 158.2 (6.23) 210 (8.27) 167.5 (6.59) DSHG-01- ??? - ? -a ? -n/n1 DSHG-01- ??? - ? -d ? -n/n1 DSHG-01- ??? - ? -r ? -n k sol a sol b sol a sol b pilot pressure port "x" "j" thd. pilot drain port "y" "j" thd. 60 (2.36) 118 (4.65) l d 105 (4.13) d 65 (2.56) c 48 (1.89) e h f 27 (1.06) (2.76) 70 78 (3.07) 43.5 (1.71) 125 (4.92) k j cable departure cable applicable: outside dia. ?????? 8-10mm(.31-.39 in.) conductor area ?????? not exceeding 2 1.5mm (.002 sq. in.) the position of the plug-in connector can be changed as illustrated below by loosening the lock nut. after completion of the change, be sure to tighten the lock nut with the torque as specified below. lock nut tightening torque: 10.3 - 11.3 nm ( 91-100 in.lbs.) no.19 solenoid controlled pilot operated directional valves DSHG-01 external pilot-external drain external pilot-internal drain internal pilot-external drain plug-in connector type: DSHG-01- ??? - ? - -13/1380/1390 internal pilot-internal drain n n1 for other dimensions, refer to "terminal box type". dimensions in millimetres (inches)
directional controls mounting surface: iso 4401-ac-05-4-a (the pilot and drain ports in accordance with the iso original draft) installation drawing model numbers dshg-03- ??? - ? -13 dshg-03- ??? - ? -1390 "c" thd. g 1/2 1/2 npt model numbers dimensions mm (inches) cdefhj 53 (2.09) 64 (2.52) 57.2 (2.25) 175 (6.89) 186 (7.32) 189 (7.44) 27.5 (1.08) 27.5 (1.08) 34 (1.34) 179.7 (7.07) 189 (7.44) 191.4 (7.54) 47.2 (1.86) 210 (8.27) 56.5 (2.22) dshg-03- ??? - ? -a ? -n/n1 dshg-03- ??? - ? -d ? -n/n1 dshg-03- ??? - ? -r ? -n k 39 (1.54) 39 (1.54) 53 (2.09) sol a sol b sol a sol b space needed to remove solenoid-each end manual actuator 6(.24) dia. electrical conduit connection "c" thd. (both ends) mounting surf ace (o-rings furnished) double solenoid models only 70 (2.76) 58 (2.28) 170 (6.69) 90 (3.54) 0.5 (.02) 1 (.04) (1.73) 44 ac : dc,r : 179.7 (7.07) 189 (7.44) 27 (1.06) 110 (4.33) 157 (6.18) 175.3 (6.90) tank port "t" solenoid indicator light cylinder port "b" pressure port "p" cylinder port "a" 7(.28) dia. through, 11(.43) dia. spotface 4 places 54 (2.13) pilot drain port "y" (for external drain models only) pilot pressure port "x" (for external pilot models only) ac : dc,r : 67.7 (2.67) 77 (3.03) ac : dc,r : 45.5 (1.79) 55 (2.17) ac : dc,r : 191.4 (7.54) 210 (8.27) 70 (2.76) f e d 27 (1.06) 110 (4.33) 58 (2.28) 170 (6.69) h j k c 97 (3.82) cable departure cable applicable: outside dia. ?????? 8-10mm(.31-.39 in.) conductor area ?????? not exceeding 2 1.5mm (.002 sq. in.) 46 (1.81) no.20 solenoid controlled pilot operated directional valves dshg-03 terminal box type: dshg-03- ??? - ? -13/1390 position of cable departure can be changed. for details, refer to DSHG-01 valve on page 19. of the two of tank port "t", the tank port in the left side is normally used in our standard sub-plate, though, either side of the tank port "t" can be used without problem. for other dimensions, refer to "terminal box type". plug-in connector type: dshg-03- ??? - ? - -13/1390 n n1 dimensions in millimetres (inches)
directional controls e mounting surface: iso 4401-ad-07-4-a installation drawing model numbers " c " thd. (s-)dshg-04- ??? - ? -51 (s-)dshg-04- ??? - ? -5190 g 1/2 1/2 npt model numbers (s-)dshg-04- ??? -a ? -n/n1 (s-)dshg-04- ??? -d ? -n/n1 (s-)dshg-04- ??? -r ? -n dimensions mm (inches) cd e f j k h 39 39 53 (1.54) (1.54) (2.09) 53 64 57.2 (2.09) (2.52) (2.25) 181 192 195 (7.13) (7.56) (7.68) 27.5 27.5 34 (1.08) (1.08) (1.34) 191.4 (7.54) 210 (8.27) 47.2 (1.86) 56.5 (2.22) 44.1 (1.74) 53.4 (2.10) sol a sol b ll' sol a sol b a p b 34 (1.34) ac : dc,r : 191.4 210 90 (3.54) 0.5 (.02) (7.54) (8.27) ac : dc,r : 50.7 60 (2.00) (2.36) ac : dc,r : 45.5 55 (1.79) (2.17) ac : dc,r : 44.1 53.4 (1.74) (2.10) 101.6 (4.00) 50.4 (1.98) 204(8.03) tank port " t " 11(.43) dia. through 17.5(.69) dia. spotface 4 places pressure port " p " pilot pressure port " x " (for external pilot models only) 50 (1.97) 34.9 (1.37) 69.8 (2.75) 1.5 (.06) 72.9 (2.87) 91 (3.58) pilot drain port " y " (for external drain models only) cylinder port " b " solenoid indicator light cylinder port " a " 7(.28) dia. through 11(.43) dia. spotface 2 places 116 (4.57) 163 (6.42) 181.3 (7.14) space needed to remove solenoid-each end double solenoid models only 34 (1.34) 4 (.16) 35 (1.38) manual actuator 6(.24) dia. nut 22(.87) hex. 3(.12) dia. two locating pins electrical conduit connection " c " thd. (both ends) 48 (1.89) mounting surf ace (o-rings furnished) cable departure cable applicable: outside dia. 8-10 mm(.31 - .39 in.) 2 conductor area not ex ceeding 1.5 mm (. 002 sq. in.) ...... ... h 0.5 (.02) j c d k 116 (4.57) e f 34 (1.34) 35 (1.38) solenoid controlled pilot operated directional valves dshg-04 / s-dshg-04 no.21 terminal box type: (s-)dshg-04- ??? - ? -51/5190 plug-in connector type: (s-)dshg-04- ??? - ? - -51/5190 n n1 position of cable departure can be changed. for details, refer to DSHG-01 valve on page 19. for other dimensions, refer to "terminal box type". dimensions in millimetres (inches)
directional controls mounting surface: iso 4401-ae-08-4-a installation drawing model numbers " c " thd. (s-)dshg-06- ??? - ? -52 (s-)dshg-06- ??? - ? -5290 g 1/2 1/2 npt model numbers (s-)dshg-06- ??? -a ? -n/n1 (s-)dshg-06- ??? -d ? -n/n1 (s-)dshg-06- ??? -r ? -n dimensions mm (inches) cd e f j k h 39 39 53 (1.54) (1.54) (2.09) 53 64 57.2 (2.09) (2.52) (2.25) 202 213 216 (7.95) (8.39) (8.50) 27.5 27.5 34 (1.08) (1.08) (1.34) 191.4 (7.54) 210 (8.27) 47.2 (1.86) 56.5 (2.22) 42.7 (1.68) 52 (2.05) x ab y p t sol a sol b apb ll' sol a sol b a p b 53.2 (2.09) ac : dc,r : 191.4 210 90 (3.54) 0.5 (.02) (7.54) (8.27) ac : dc,r : 50.7 60 (2.00) (2.36) ac : dc,r : 45.5 55 (1.79) (2.17) ac : dc,r : 45.5 55 (1.79) (2.17) 130.2 (5.13) 255(10.04) tank port " t " 13.5(.53) dia. through 20(.79) dia. spotface 6 places pressure port " p " pilot pressure port " x " (for external pilot models only) 77 (3.03) 46.1 (1.81) 92.1 (3.63) 13 (.51) 118 (4.65) pilot drain port " y " (for external drain models only) cylinder port " b " solenoid indicator light cylinder port " a " space needed to remove solenoid-each end 6 (.24) manual actuator 6(.24) dia. nut 22(.87) hex. 6(.24) dia. two locating pins electrical conduit connection " c " thd. (both ends) 48 (1.89) mounting surf ace (o-rings furnished) cable departure cable applicable: outside dia. 8-10 mm(.31 - .39 in.) 2 conductor area not ex ceeding 1.5 mm (. 002 sq. in.) ...... ... h 97 (3.82) j c d k 137 (5.39) e f 41 (1.61) 50.5 (1.99) 156 (6.14) 137 (5.39) 184 (7.24) 202.3 (7.96) 41 (1.61) solenoid controlled pilot operated directional valves dshg-06 / s-dshg-06 terminal box type: (s-)dshg-06- ??? - ? -52/5290 plug-in connector type: (s-)dshg-06- ??? - ? - -52/5290 n n1 for other dimensions, refer to "terminal box type". position of cable departure can be changed. for details, refer to DSHG-01 valve on page 19. dimensions in millimetres (inches) no.22
directional controls e mounting surface: iso 4401-af-10-4-a installation drawing model numbers " c " thd. (s-)dshg-10- ??? - ? -42 (s-)dshg-10- ??? - ? -4290 g 1/2 1/2 npt model numbers (s-)dshg-10- ??? -a ? -n/n1 (s-)dshg-10- ??? -d ? -n/n1 (s-)dshg-10- ??? -r ? -n dimensions mm (inches) cd e f j k h 39 39 53 (1.54) (1.54) (2.09) 53 64 57.2 (2.09) (2.52) (2.25) 265 276 279 (10.43) (10.87) (10.98) 27.5 27.5 34 (1.08) (1.08) (1.34) 191.4 (7.54) 210 (8.27) 47.2 (1.86) 56.5 (2.22) 19.7 (.78) 29 (1.14) sol a sol b apb l l' 198 (7.80) x x sol a sol b a p b 76.2 (3.00) ac : dc,r : 191.4 210 90 (3.54) (7.54) (8.27) ac : dc,r : 50.7 60 (2.00) (2.36) ac : dc,r : 45.5 55 (1.79) (2.17) ac : dc,r : 19.7 29 (.78) (1.14) 190.5 (7.50) 384(15.12) tank port " t " pressure port " p " pilot pressure port " x " (for external pilot models only) 78 (3.07) 43(1.69) 158.8 (6.25) 19.6 (.77) 79.4 (3.13) cylinder port " b " solenoid indicator light cylinder port " a " 200 (7.87) 247 (9.72) 265.3 (10.44) space needed to remove solenoid-each end two eye bolts m8 44.5 (1.75) 6 (.24) 46 (1.81) manual actuator 6(.24) dia. nut 22(.87) hex. 6(.24) dia. two locating pins electrical conduit connection " c " thd. (both ends) 48 (1.89) mounting surf ace (o-rings furnished) cable departure cable applicable: outside dia. 8-10 mm(.31 - .39 in.) 2 conductor area not ex ceeding 1.5 mm (. 002 sq. in.) ...... ... h 97 (3.82) j c d k 200 (7.87) f 77.5 (3.05) 21.5(.85) dia. through 32(1.26) dia. spotface 6 places pilot drain port " y " (for external drain models only) 114.3 (4.50) 21.8 (.86) 233.8(9.20) 0.5 (.02) e 45 (1.77) 46 (1.81) solenoid controlled pilot operated directional valves dshg-10 / s-dshg-10 no.23 terminal box type: (s-)dshg-10- ??? - ? -42/4290 plug-in connector type: (s-)dshg-10- ??? - ? - -42/4290 n n1 position of cable departure can be changed. for details, refer to DSHG-01 valve on page 19. for other dimensions, refer to "terminal box type". dimensions in millimetres (inches)
directional controls 1. 2. 3. 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 options model numbers cdefh ac sol dc sol r sol j dimensions mm (inches) (s-) (s-) (s-) (s-) (s-) (s-) (s-) (s-) (s-) dshg-03- ??? -c1 dshg-03- ??? -c2 dshg-03- ??? -c1c2 dshg-04- ??? -c1 dshg-04- ??? -c2 dshg-04- ??? -c1c2 dshg-06- ??? -c1 dshg-06- ??? -c2 dshg-06- ??? -c1c2 dshg-10- ??? -c1 dshg-10- ??? -c2 dshg-10- ??? -c1c2 200.3 (7.89) 225.3 (8.87) 206.3 (8.12) 231.3 (9.11) 227.3 (8.95) 252.3 (9.93) 290.3 (11.43) 315.3 (12.41) 182 (7.17) 207 (8.15) 188 (7.40) 213 (8.39) 209 (8.23) 234 (9.21) 272 (10.71) 297 (11.69) 135 (5.31) 160 (6.30) 141 (5.55) 166 (6.54) 162 (6.38) 187 (7.36) 225 (8.86) 250 (9.84) 100 (3.94) 125 (4.92) 106 (4.17) 131 (5.16) 127 (5.00) 152 (5.98) 190 (7.48) 215 (8.46) 100 (3.94) 100 (3.94) 106 (4.17) 106 (4.17) 127 (5.00) 127 (5.00) 190 (7.48) 190 (7.48) 200 (7.87) 225 (8.86) 206 (8.11) 231 (9.09) 227 (8.94) 252 (9.92) 390 (15.35) 415 (16.34) 211 (8.31) 236 (9.29) 217 (8.54) 242 (9.53) 238 (9.37) 263 (10.35) 401 (15.79) 426 (16.77) 214 (8.43) 239 (9.41) 220 (8.66) 245 (9.65) 241 (9.49) 266 (10.47) 404 (15.91) 429 (16.89) apb sol a sol b sol a sol b fully extended 59 (2.32) fully extended 59 (2.32) 37.5 (1.48) h f e d c sol a sol b sol a sol b e d h f c e d f h c fully extended 59 (2.32) sol a sol b e j h f fully extended 59 (2.32) 37.5 (1.48) e j h f fully extended 59 (2.32) e fully extended 59 (2.32) f h j sol a sol b p ab no.24 solenoid controlled pilot operated directional valves dshg-03, 04, 06, 10 / s-dshg-04, 06, 10 models with pilot choke valve terminal box type dshg-03- ??? -c1/c2/c1c2 (s-)dshg-04- ??? -c1/c2/c1c2 06 10 (s-)dshg- - ??? -c1/c2/c1c2 plug-in connector type dshg-03- ??? n n1 -c1/c2/c1c2- (s-)dshg-04- ??? n n1 -c1/c2/c1c2- 06 10 (s-)dshg- - ??? n n1 -c1/c2/c1c2- "c1" choke adj. screw 6 (.24) hex. "c2" choke adj. screw 6 (.24) hex. lock nut 12 (.47) hex. dimensions in millimetres (inches)
directional controls e options model numbers (s-)dshg-06- ??? -r2 (s-)dshg-10- ??? -r2 cde 376 (14.80) 558 (21.97) 111 (4.37) 164.5 (6.48) 40 (1.57) 65 (2.56) model numbers (s-)dshg-06-3h ? c 306.5 (12.07) 456 (17.95) d 102 (4.02) 149.5 (5.89) model numbers c 323 (12.72) 479 (18.86) d 84 (3.31) 125 (4.92) (s-)dshg-06- ??? -p2 (s-)dshg-10- ??? -p2 sol a sol b sol a sol b sol a sol b a p b sol a sol b a p b sol a sol b a p b stroke adj. screw (port "b" end) 17 (.67) hex. e d fully extended c fully extended fully extended 93 (3.66) stroke adj. screw (port "a" end) 17 (.67) hex. lock nut 24(.94) hex. fully extended 289 (11.38) 33 (1.30) stroke adj. screw (port "a" end) 13 (.51) hex. stroke adj. screw (port "b" end) 13 (.51) hex. lock nut 17(.67) hex. fully extended 99 (3.90) stroke adj. screw (port "a" end) 13 (.51) hex. stroke adj. screw (port "b" end) 13 (.51) hex. 35 (1.38) lock nut 17(.67) hex. fully extended 252 (9.92) d c c d no.25 solenoid controlled pilot operated directional valves dshg-03, 04, 06, 10 / s-dshg-04, 06, 10 models with stroke adjustment dshg-03- ??? -r ? (s-)dshg-04- ??? -r ? 06 10 (s-)dshg- - ??? -r ? pressure centred models models with pilot piston 06 10 (s-)dshg- -3h ? 06 10 (s-)dshg- - ??? -p ? dimensions in millimetres (inches)
directional controls installation drawing sub-plate model numbers dhgm-03y-10 dhgm-03y-1080 dhgm-03y-1090 " c " thd. " d " thd. rc 3/4 3/4 bsp.f 3/4 npt " e " thd. 13(.51) 15(.59) rc 1/4 1/4 bsp.f 1/4 npt m6 1/4-20 unc f mm (in.) sub-plate model numbers dhgm-04-20 dhgm-04x-20 " c " thd. rc 1/2 rc 3/4 " e " thd. m10 3/8-16 unc 1/2 bsp.f 3/4 bsp.f 1/2 npt 3/4 npt " d " thd. rc 1/4 1/4 bsp.f 1/4 npt " f " thd. m6 1/4-20 unc dhgm-04-2080 dhgm-04x-2080 dhgm-04-2090 dhgm-04x-2090 valve types spring centred no-spring solenoid controlled pilot operated directional valves pilot operated directional valves manually operated directional valves spring offset pilot pressure port " x "port " y " used only on external pilot type valves. to be plugged on internal pilot type valves. used not used (plug is not required) used as drain port only on external drain type valves. to be plugged on internal drain type valves. used as drain port used as pilot drain port used as pilot pressure port 120 (4.72) 90 (3.54) 15 (.59) 110 (4.33) 22(.87) " d " thd. used only on external pilot type valves. to be plugged on internal pilot type valves. " e " thd. " f " deep 4 places 25 (.98) 19 (.75) 90 (3.54) 46 (1.81) 10 (.39) 32.5(1.28) 21.5(.85) 6.4(.25) 6.2(.24) dia. 6.2(.24) dia. 19 (.75) 92 (3.62) 11 (.43) 12 (.47) 70 (2.76) 11(.43) dia. 4 places 18 (.71) 62 (2.44) 54 (2.13) 37.3(1.47) 27(1.06) 16.7(.66) 8(.31) 3.2 (.13) " c " thd. 4 places p t a b 19 (.75) 25(.98) 42(1.65) 43(1.69) 50 (1.97) 10 (.39) 45 (1.77) 80 (3.15) 16(.63) 47 (1.85) 76 (2.99) p t a b x y 190 (7.48) 166 (6.54) 101.6 (4.00) 76.7 (3.02) 12(.47) 32.2(1.27) 50 (1.97) 34(1.34) 18.3(.72) 11(.43) dia. through 17.5(.69) dia. spotface 4 places 3.6(.14) dia. 5(.20) deep 2 places 14.2 (.56) 65.8 (2.59) 88.1 (3.47) 130 (5.12) " e " thd. 17(.67) deep 4 places 6(.24) dia. 2 places 17.5(.69) dia. 4 places " f " thd. 12(.47) deep 2 places 120 (4.72) 96 (3.78) 71.4 (2.81) 12 (.47) 13.1 (.52) 69.8 (2.75) 55.6 (2.19) 14.2 (.56) 1.6(.06) 16 (.63) 10.1 (.40) 57.1 (2.25) 90 (3.54) 36 (1.42) 20 (.79) 19 (.75) p t a b x y " d " thd. 2 places 125 (4.92) 90 (3.54) 46 (1.81) 65 (2.56) 29 (1.14) 58 (2.28) 102 (4.02) 137.5 (5.41) 76 (2.99) 21.5(.85) 33(1.30) " c " thd. 4 places " d " thd. used only on external drain type valves. to be plugged on internal drain type valves. no.26 dhgm-03y-10/1080/1090 dhgm- -20/2080/2090 04 04x sub-plate for solenoid controlled pilot operated directional valves dimensions in millimetres (inches)
e directional controls installation drawing ? f mm (in.) sub-plate model numbers " c " thd. " e " thd. m12 1/2-13 unc rc 3/4 rc 1 3/4 npt 1 npt " d " thd. rc 1/4 1/4 npt 24 (.94) 26 (1.02) dhgm-06-50 dhgm-06x-50 dhgm-06-5090 dhgm-06x-5090 sub-plate model numbers " c " thd. 3/4 bsp.f 1 bsp.f dhgm-06-5080 dhgm-06x-5080 dimensions mm (inches) defhjkln 151.2 (5.95) 155.2 (6.11) 137.7 (5.42) 148 (5.83) 102 (4.02) 106 (4.17) 54.4 (2.14) 50 (1.97) 30.6 (1.20) 25 (.98) 125.8 (4.95) 130 (5.12) 78.2 (3.08) 74 (2.91) 42.5 (1.67) 32 (1.26) 204 (8.03) 12 (.47) " e " thd. " f " deep 6 places 116 (4.57) 17.5(.69) 53.2 (2.09) 29.4(1.16) p t a b y x v 7(.28) dia. 8(.31) deep 2 places 11(.43) dia. through 17.5(.69) dia. spotface 4 places 23(.91) dia. " c " thd. (from rear) 4 places 11(.43) dia. " d " thd. (from rear) 4 places 180 (7.09) 25 (.98) 130.2 (5.13) 112.7 (4.44) 94.5 (3.72) 77 (3.03) 5.6(.22) 19.1(.75) 92.1 (3.63) 74.6 (2.94) 12 (.47) 46.1 (1.81) 73.1 (2.88) 96.9 (3.81) 17.5 (.69) 29.5 (1.16) 100.8 (3.97) 126.2 (4.97) 12.5 (.49) 156 (6.14) 50 (1.97) 34(1.34) 35(1.38) p t ab y x v w 204 (8.03) 180 (7.09) 12 (.47) 25 (.98) 130.2 (5.13) m12 thd. 24(.94) deep 6 places 11(.43) dia. 4 places 24.5(.96) dia. 4 places 12.5 (.49) 156 (6.14) 92.1 (3.63) 110 (4.33) 134 (5.28) 8.9 (.35) 12 (.47) 11.9 (.47) 116 (4.57) 50 (1.97) 35 (1.38) p t a b y w d e f h j n l k 73.1 (2.88) 17.5 (.69) 19.1 (.75) 74.6 (2.94) 46.1 (1.81) 1/4 bsp.f thd. 4 places " c " thd. 4 places x v dhgm- -50/5090 06 06x no.27 dhgm- -5080 06 06x for other dimensions, refer to "dhgm-06 ? -50/5090" a bove. sub-plate for solenoid controlled pilot operated directional valves for uses of port "x", "y", "v", "w", refer to dhgm-10 ? on the following page. dimensions in millimetres (inches)
directional controls installation drawing sub-plate model numbers "c" thd. "d" thd. "e" thd. fh j k dimensions mm (inches) dhgm-10-40 dhgm-10-4080 dhgm-10-4090 rc 1-1/4 1-1/4 bsp.f 1-1/4 npt rc 3/8 3/8 bsp.f 3/8 npt m20 m20 3/4-10 unc 152 (5.98) 79 (3.11) 185.5 (7.30) 120.5 (4.74) dhgm-10x-40 dhgm-10x-4080 dhgm-10x-4090 rc 1-1/2 1-1/2 bsp.f 1-1/2 npt rc 3/8 3/8 bsp.f 3/8 npt m20 m20 3/4-10 unc 156 (6.14) 74 (2.91) 194.5 (7.66) 112.5 (4.43) spring centred, no-spring, spring offset pressure centred with pilot piston, both ends with pilot piston, port "a" end with pilot piston, port "b" end solenoid controlled pilot operated directional valves used only on external pilot type valves. to be plugged on internal pilot type valves. used as drain port only on external drain type valves. to be plugged on internal drain type valves. not used (plug is not required) used not used used used used not used (plug is required) not used (plug is required) used spring centred, no-spring spring offset pressure centred with pilot piston, both ends with pilot piston, port "b" end with pilot piston port "a" end spring centred no-spring spring offset manually operated directional valves pilot operated directional valves used used as pilot pres. port used as pilot drain port used as pilot pres. port used as pilot pres. port used as pilot drain port not used (plug is not required) not used (plug is not required) not used (plug is not required) used used not used (pllug is required) not used used used not used (plug is required) not used (plug is not required) used used valve types pilot pres. port " x "port " y " drain port " v " drain port " w " note: uses of port "x", "y", "v", and "w" f h k j w y p t v a b x y b a p t v x w 41.3(1.63) 76.2(3.00) 114.3 (4.50) 147.6 (5.81) 168.3 (6.63) 190.5 (7.50) 266.5 (10.49) 38(1.50) 20(.79) 306.5 (12.07) 28.6 (1.13) 79.4 (3.13) 123.8 (4.87) 158.8 (6.25) 199 (7.83) 20.1 (.79) 82.5 (3.25) 21.8 (.86) 234 (9.21) 35 (1.38) 114.3 (4.50) 7 (.28) dia. 8 (.31) deep 2 places "e" thd. 34 (1.34) deep 6 places 11 (.43) dia. 4 places 17.5 (.69) dia. through 26 (1.02) dia. spotf ace 4 places 36 (1.42) dia. 4 places 60 (2.36) 43(1.69) 44(1.73) 55 (2.17) 213 (8.39) "c" thd. 4 places "d" thd. 4 places no.28 sub-plate for solenoid controlled pilot operated directional valves 10 10x dhgm- -40/4080/4090 as the thread is provided on the body, plug e ither port on the sub-plate or port on the body. dimensions in millimetres (inches)
e directional controls spare parts list item name part numbers qty. DSHG-01 part numbers qty. dshg-03 7 8 9 10 o-ring o-ring o-ring o-ring jaso-1018-1a so-nb-p9 so-nb-p5 2 8(4) 2 so-nb-p28 so-nb-a104 so-nb-p9 2 5 6 so-nb-p9 2 sol b sol a 12 16 17 14 15 12 2 5 4 10 11 8 3 1 7 6 13 13 18 8 pipe plug removed for external drain models pipe plug removed for internal pilot models pipe plug removed for internal drain models pipe plug removed for external pilot models sol a sol b x y xy 14 17 16 15 13 13 2 5 4 9 1 3 8 10 7 6 12 pipe plug removed for internal pilot models pipe plug removed for internal drain models no.29 solenoid controlled pilot operated directional valves DSHG-01, 03 DSHG-01- ??? - ? -13/1380/1390 note: piece parts marked are not available for internal pilot-internal drain type dshg-03- ??? - ? -13/1390 section y-y section x-x list of seals pilot valves see page 31 for the pilot valve model numbers to be used. quantities in the ( ) are applicable to internal pilot-internal drain. note: when ordering the o-rings, please specify the seal kit number listed in page 31. in addition to the above o-rings, o-rings for pilot valve is included in the seal kit. for the detail of the pilot valve o-rings, see the catalogue no. pub. ec-0402. caution when making replacement of seals or pilot valves, please do it carefully after reading through the relevant instructions in the operator's manual.
directional controls spare parts list item name (s-)dshg-04 so-nb-p9 so-nb-p22 so-nb-p34 so-nb-p9 (s-)dshg-06 so-nb-p14 so-nb-p30 so-nb-p40 so-nb-p10 (s-)dshg-10 so-nb-p20 so-nb-p42 so-nb-p65 so-nb-p14 qty. part numbers 2 4 2 2 o-ring 8 9 10 18 14 15 16 17 sol a sol b x y x y 18 10 5 4 1 3 9 13 8 2 7 12 11 11 pipe plug removed for internal drain models pipe plug removed for internal pilot models sol a sol b x y x y 16 14 17 15 21 21 18 2 10 5 3 1 9 13 8 4 7 11 11 12 12 pipe plug removed for internal pilot models pipe plug removed for internal drain models 11 pipe plug removed for external drain models 21 no.30 solenoid controlled pilot operated directional valves dshg-04,06,10 / s-dshg-04,06,10 (s-)dshg-04- ??? - ? -51/5190 section y-y section x-x (s-)dshg-06- ??? - ? -52/5290 (s-)dshg-10- ??? - ? -42/4290 section y-y section x-x list of seals pilot valves see page 31 for the pilot valve model numbers to be used. note: when ordering the o-rings, please specify the seal kit number listed in page 31. in addition to the above o-rings, o-rings for pilot valve is included in the seal kit. for the detail of the pilot valve o-rings, see the catalogue no. pub. ec-0402. note: item orifice marked is applicable to pressure centred models (3h ? ) with pilot pressure more than 10 mpa (1450 psi). caution when making replacement of seals or pilot valves, please do it carefully after reading through the relevant instructions in the operator's manual.
e directional controls list of pilot valves & seal kits valve model numbers pilot valve model numbers seal kit numbers dshg-03-3c ? - - -13 dshg-03-3c ? - - -1390 DSHG-01-3c ? - - -13 DSHG-01-3c ? - -n-1380 DSHG-01-3c ? - - -1390 DSHG-01-2b ? - - -13 DSHG-01-2b ? - -n-1380 DSHG-01-2b ? - - -1390 dshg-03-2b ? - - -13 dshg-03-2b ? - - -1390 dshg-03-2n ? - - -13 dshg-03-2n ? - - -1390 (s-)dshg-04-3c ? - - -51 (s-)dshg-04-3c ? - - -5190 (s-)dshg-04-2b ? - - -51 (s-)dshg-04-2b ? - - -5190 (s-)dshg-04-2n ? - - -51 (s-)dshg-04-2n ? - - -5190 (s-)dshg-06-3c ? - - -52 (s-)dshg-06-3c ? - - -5290 (s-)dshg-06-2b ? - - -52 (s-)dshg-06-2b ? - - -5290 (s-)dshg-06-2n ? - - -52 (s-)dshg-06-2n ? - - -5290 (s-)dshg-10-3c ? - - -42 (s-)dshg-10-3c ? - - -4290 (s-)dshg-10-2b ? - - -42 (s-)dshg-10-2b ? - - -4290 (s-)dshg-10-2n ? - - -42 (s-)dshg-10-2n ? - - -4290 dsg-01-3c4- - -60 dsg-01-3c4- -n-60 dsg-01-3c4- - -6090 dsg-01-2b2- - -60-l dsg-01-2b2- -n-60-l dsg-01-2b2- - -6090-l dsg-01-3c4- - -60 dsg-01-3c4- - -6090 dsg-01-2b2- - -60 dsg-01-2b2- - -6090 dsg-01-2d2- - -60 dsg-01-2d2- - -6090 dsg-01-3c4- - -60 dsg-01-3c4- - -6090 dsg-01-2b2- - -60 dsg-01-2b2- - -6090 dsg-01-2d2- - -60 dsg-01-2d2- - -6090 dsg-01-3c4- - -60 dsg-01-3c4- - -6090 dsg-01-2b2- - -60-l dsg-01-2b2- - -6090-l dsg-01-2d2- - -60 dsg-01-2d2- - -6090 dsg-01-3c4- - -60 dsg-01-3c4- - -6090 dsg-01-2b2- - -60-l dsg-01-2b2- - -6090-l dsg-01-2d2- - -60 dsg-01-2d2- - -6090 ks-DSHG-01- -13 (for internal pilot-internal drain) ks-DSHG-01-et- -13 (except for internal pilot-internal drain) ks-dshg-03- -13 ks-dshg-04- -51 ks-dshg-06- -52 ks-dshg-10- -42 notes) 1: 2: fill coil type (a symbol representing current/voltage) in section marked . likewise, in section marked , fill a symbo l representing the type of electrical conduit connection (none: terminal box type, n: plug-in connector type). for the details of the pilot valves, see the catalogue no. pub.ec-0402. no.31 solenoid controlled pilot operated directional valves dshg / s-dshg
directional controls interchangeability between curent and new design no changes yes dsg-01- ??? - ? -50 ? dsg-01- ??? - ? -60 ? for details, refer to the catalogue no. pub. ec-0402 pilot valve specifications interchangeability in mtg. current DSHG-01- ??? - ? -12 ? DSHG-01- ??? - ? -12 ? new DSHG-01- ??? - ? -13 ? DSHG-01- ??? - ? -13 ? descriptions model no. 130.3 (5.13) 170.3 (6.70) c model no. DSHG-01-t DSHG-01-e /et /none h c b a ac dc r ac dc r DSHG-01-t e et none DSHG-01- model no. 191.4 (7.54) 191.4 (7.54) 210 (8.27) 210 (8.27) 50.7 (2.00) 50.7 (2.00) 60 (2.36) 60 (2.36) 76.7 (3.02) 76.7 (3.02) 86 (3.39) 86 (3.39) 130.3 (5.13) 170.3 (6.70) h b a ac dc r dshg-03 model no. 191.4 (7.54) 210 (8.27) 50.7 (2.00) 60 (2.36) 67.7 (2.67) 77 (3.03) sol a sol b sol b sol a sol a sol b sol a sol b 210 (8.27) 60 (2.36) 90 (3.54) 0.5 (.02) 86 (3.29) 90 (3.54) 0.5 (.02) 210 (8.27) 60 (2.36) 90 (3.54) 0.5 (.02) 77 (3.03) 0.5 (.02) 90 (3.54) c c b a h b a h 175.3 (6.90) 175.3 (6.90) no.32 solenoid controlled pilot operated directional valves DSHG-01 / 03 DSHG-01 in accordance with the improvement of the pilot valve (dsg-01), DSHG-01 and -03 have been model-changed (from 12-design to 13-design). DSHG-01, 03 dshg-03 current new dimensions in millimetres (inches)
directional controls e interchangeability between current and new design no changes yes dsg-01- ??? - ? -50 ? dsg-01- ??? - ? -60 ? for details, refer to the catalogue no. pub. ec-0402. pilot valve specifications interchangeability in mtg. current (s-)dshg-04- ??? - ? -50 ? descriptions model no. new (s-)dshg-04- ??? - ? -51 ? no changes yes dsg-01- ??? - ? -50 ? dsg-01- ??? - ? -60 ? for details, refer to the catalogue no. pub. ec-0402 pilot valve specifications interchangeability in mtg. current (s-)dshg-06- ??? - ? -51 ? (s-)dshg-10- ??? - ? -41 ? new (s-)dshg-06- ??? - ? -52 ? (s-)dshg-10- ??? - ? -42 ? descriptions model no. 202.3 (7.96) 265.3 (10.44) c model no. (s-)dshg-06 (s-)dshg-10 h c b a ac dc r ac dc r (s-)dshg-06 model no. 191.4 (7.54) 191.4 (7.54) 210 (8.27) 210 (8.27) 50.7 (2.00) 50.7 (2.00) 60 (2.36) 60 (2.36) 42.7 (1.68) 19.7 (.78) 52 (2.05) 29 (1.14) 202.3 (7.96) 265.3 (10.44) 51.3 (2.02) 28.5 (1.12) h (s-)dshg-10 sol b sol a sol a sol b sol a sol b apb apb sol a sol b 53.4 (2.10) 210 (8.27) (2.36) 90 (3.54) 0.5 (.02) 60 0.5 (.02) 181.3 (7.14) 181.3 (7.14) ac : dc,r : 191.4 (7.54) 210 (8.27) ac : dc,r : 50.7 (2.00) 60 (2.36) ac : dc,r : 44.1 (1.74) 53.4 (2.10) 210 (8.27) (2.36) 90 (3.54) 0.5 (.02) 60 c h h c 90 (3.54) 0.5 (.02) a b 90 (3.54) no.33 solenoid controlled pilot operated directional valves (s)-dshg-04 / 06 / 10 (s-) dshg-04 has been model changed in accordance with the improvement of the pilot valve (dsg-01). for details, see the following. (s-)dshg-04 (s-) dshg-06 and -10 have been model changed in accordance with the improvement of the pilot valve (dsg-01). for details, see below. (s-)dshg-06,10 current new current new dimensions in millimetres (inches)
directional controls 1. 2. 3. 4. 1 1 1 1 2 2 2 2 3 3 3 3 3 3 specifications / instructions / others 2 4 4 x p y 10 mpa (1450 psi) 16 mpa (2320 psi) 25 mpa (3630 psi) 31.5 mpa (4570 psi) maximum flow l /min (u.s.gpm) dhg-04-3c ? -50 ? dhg-04-2n ? -50 ? dhg-04-2b ? -50 ? dhg-06-3c ? -50 ? dhg-06-2n ? -50 ? dhg-06-2b ? -50 ? dhg-06-3h ? -50 ? dhg-10-3c ? -40 ? dhg-10-2n ? -40 ? dhg-10-2b ? -40 ? dhg-10-3h ? -40 ? model numbers max.operating pressure mpa (psi) max. t-line back pressure mpa (psi) approx. mass kg (lbs.) min. required pilot pressure mpa (psi) max. pilot pressure mpa (psi) 300 (79.3) 300 (79.3) 130 (34.3) 500 (132) 500 (132) 140 (37) 500 (132) 1100 (291) 1100 (291) 460 (122) 1100 (291) 300 (79.3) 300 (79.3) 70 (18.5) 500 (132) 500 (132) 100 (26.4) 500 (132) 1100 (291) 1100 (291) 300 (79.3) 1100 (291) 300 (79.3) 300 (79.3) 70 (18.5) 500 (132) 500 (132) 90 (23.8) 500 (132) 1100 (291) 1100 (291) 220 (58.1) 1100 (291) 300 (79.3) 300 (79.3) 60 (15.9) 500 (132) 500 (132) 80 (21.1) 500 (132) 1100 (291) 1100 (291) 200 (52.8) 1100 (291) 7.4 (16.3) 7.4 (16.3) 7.8 (17.2) 11.2 (24.7) 11.2 (24.7) 11.7 (25.8) 12.0 (26.5) 43.8 (96.6) 43.8 (96.6) 45.6 (101) 51.6 (114) 31.5 (4570) 31.5 (4570) 31.5 (4570) 25 (3630) 25 (3630) 25 (3630) 21 (3050) 21 (3050) 21 (3050) 21 (3050) 21 (3050) 0.8 (120) 0.8 (120) 1 (150) 1 (150) 1 (150) model numbers rated flow l/min (u.s.gpm) max.operating pres. mpa (psi) 21 (3050) 500 (132) 1200 (317) 2400 (634) dhf-16- ??? -30 ? dhf-24- ??? -26 ? dhf-32- ??? -21 ? no.34 pilot operated directional valves dhg-04 / 06 / 10 sub-plate mounting yuken can offer flanged connection valves described below. for details, contact yuken. note: max. flow in the table above represents the value in the flow condition of p a b t (or p b a t) as shown in the circuit diagram right. in case the valves is used in the condi- tion that eihter a or b port is blocked, the maximum flow differs according to a hydraulic circuit, therefore, please consult us for details. varies depending on the spool type. for more information, see page 11 for the list of "standard model and maximum flow" (dshg-04) for solenoid controlled pilot operated directional valves. varies depending on the spool type and pilot pressure. for more information, see page 12 for the list of "standard model and maxi- mum flow" (dshg-06) related to the solenoid controlled pilot opera- ted directional valves. varies depending on the spool type and pilot pressure. for more information, see page 13 for the list of "standard model and maxi- mum flow" (dshg-10) related to the solenoid controlled pilot opera- ted directional valves. minimum pilot pressure for the models with pilot piston is 1.8 mpa (260psi). ab pt xy pressure drop same as those for solenoid controlled pilot operated directional valves. see pages 15 and 16 for the related information. instruction in case of spring offset models, directly connect the pilot pressure port "y" to the reservoir as a drain port. specifications
e directional controls 1. 2. 3. 4. 5. 1 2 3 3 4 5 2 2 : model number designation f: special seals for phos- phate ester type fluids (omit if not required) special seals f- ? dh series number g type of connec- tion -04 valve size -2 number of valve positions b spool- spring arrange- ment 2 spool type a special two position valve -c2 model with pilot choke valve (options) -ra spool control modification (options) -h built-in orifice for pilot line -50 design number design standard 04 06 10 dh: pilot oper- ated direc- tional valve g: sub- plate mount- ing 3 2 c: spring centred h: pressure centred (option) n: no-spring b: spring offset ? ? ? ? ? ? 2 4 5 60 9 11 3 40 6 7 10 12 a , b (omit if not required) c2: with c2 choke r2: adjustment, both ends with stroke ra: adjustment, port a end with stroke rb: adjustment, port b end with stroke p2: piston, both ends with pilot pa: piston, port a end with pilot pb: piston, port b end with pilot 50 40 50 refer to h: refer to refer to spool type valve types three positions spring centred pressure centred two positions no- spring spring offset graphic symbols 3c2 3c3 3c4 3c40 3c5 3c6 3c60 3c7 3c9 3c10 3c11 3c12 3h2 3h3 3h4 3h40 3h5 3h6 3h60 3h7 3h9 3h10 3h11 3h12 2n2 2n3 2n4 2n40 2n7 2b2 2b3 2b4 2b40 2b7 2 3 4 40 5 6 60 7 9 10 11 12 model numbers 3h ? c2 r2 ra rb p2 pa pb option code dhg-04-3c ? dhg-04-2n ? dhg-04-2b ? dhg-06-3c ? dhg-06-2n ? dhg-06-2b ? dhg-06-3h ? dhg-10-3c ? dhg-10-2n ? dhg-10-2b ? dhg-10-3h ? ab pt xy ab pt xy v ab pt xy ab pt y x no.35 pilot operated directional valves dhg-04/06/10 for various combination, see the list of valve types below. model number designation for the option combinations of the type (valve size) and options, see the list of options below. refer to the column "valves using neutral position and side position" (special 2-position valve) on page 36. in spool-spring arrangement "h" (pressure centred models), in cas e the pilot pressure is more than 10 mpa (150psi), please spec ify that the valve should have the built-in orifice to the pilot line. design standards: japanese standard "jis" and european design standard n. american design standard n one.................. 9 0...................... list of valve type list of options note. mark: available mark: not available pressure centered models are not available for the valve size of "04".
directional controls sub-plates / mounting bolts / options valve model numbers sub-plate model numbers thread size approx. mass kg (lbs.) sub-plate model numbers thread size approx. mass kg (lbs.) sub-plate model numbers thread size approx. mass kg (lbs.) japanese standard "jis" european design standard n. american design standard rc 1/2 rc 3/4 4.4 (9.7) 4.1 (9.0) 7.4 (16.3) 7.4 (16.3) dhg-04 dhg-06 dhg-10 21.5 (47.4) 21.5 (47.4) rc 3/4 rc 1 rc 1-1/4 rc 1-1/2 dhgm-04-20 dhgm-04x-20 dhgm-06-50 dhgm-06x-50 dhgm-10-40 dhgm-10y-40 dhgm-04-2080 dhgm-04x-2080 dhgm-06-5080 dhgm-06x-5080 dhgm-10-4080 dhgm-10y-4080 4.4 (9.7) 4.1 (9.0) 7.4 (16.3) 7.4 (16.3) 21.5 (47.4) 21.5 (47.4) 4.4 (9.7) 4.1 (9.0) 8.5 (18.7) 8.5 (18.7) 21.5 (47.4) 21.5 (47.4) dhgm-04-2090 dhgm-04x-2090 dhgm-06-5090 dhgm-06x-5090 dhgm-10-4090 dhgm-10x-4090 1/2 bsp.f 3/4 bsp.f 3/4 bsp.f 1 bsp.f 1-1/4 bsp.f 1-1/2 bsp.f 1/2 npt 3/4 npt 3/4 npt 1 npt 1-1/4 npt 1-1/2 npt model numbers dhg-04 dhg-06 dhg-10 m12 60 lg. m20 75 lg. m6 45 lg. m10 50 lg. 2 4 6 6 12-15 (106-133) 58-72 (513-637) 100-123 (885-1089) 473-585 (4186-5177) 1/4-20 unc 1-3/4 lg. 3/8-16 unc 2 lg. 1/2-13 unc 2-1/2 lg. 3/8-16 unc 2 lg. qty. tightening torque nm (in. lbs) n. american desgin standard japanese standard "jis" european design standard socket head cap screw model numbers with pilot choke valve p2 pa pb r2 ra rb with pilot piston with stroke adjustment dhg-04 dhg-06 dhg-10 0.65 (1.4) 0.65 (1.4) 0.65 (1.4) 1.0 (2.2) 3.6(7.9) 0.5 (1.1) 1.8 (4.0) 1.0 (2.2) 1.2 (2.6) 3.7 (8.2) 0.5 (1.1) 0.6 (1.3) 1.85 (4.1) kg (lbs.) a b p t x w y v a b p t xy v a b p t xy a b p t x y v stroke adjustment screw (port "a" end) stroke adjustment screw (port "b" end) ab pt xy no.36 pilot operated directional valves dhg-04 / 06 / 10 mounting bolts sub-plate sub-plates are available. specify the sub-plate model number from the table above. when sub-plates are not used, the mounting surface should have a good machined finish. sub-plates are shared with those for solenoid controlled pilot operated directional valves. refer to pages 26 to 28 for dimensi ons. options models with pilot choke adjustment (c2) when the adjustment screw is turned clockwise, changeover speed of the spool becomes slow. in case of the spring centred valves in particular, making slow of the returning speed of the spool to the neutral position is possible with a c2 choke valve. these choke valves can be used in combination with valves of spring centred, no spring, spring offset, pressure centred and the valves with stroke adjustment. models with pilot piston (p ? ) the valves with a pilot piston can be used when the high speed changeover of the spool is required. however, please note that in case of spring centred valves, there is no change in the returning speed of the spool to the neutral position even with the pilot piston. pressure centered models (3h ? ) the pressure centred type can be used when the returning of the spool to the neutral position is required to be done firmly. models with stroke adjustment (r ? ) when the adjustment screw is screwed in, the spool stroke becomes short and flow rate reduces graphic symbol graphic symbol graphic symbols spring centred models graphic symbols spring centred models with stroke adjustment on both ends (r2) spring centred models with pilot piston on both ends (p2) spring centred models with pilot piston on port "a" end (pa) additional mass of options add the mass described below to the mass of standard models on page 34 if options are required.
e directional controls mounting surface: iso 4401-ad-07-4-a special two position / installation drawing a b p t y x a b p t y x model numbers graphic symbols 04 06 10 dhg- -2b ? a dhg- ? -2b2a dhg- ? -2b3a dhg- ? -2b4a dhg- ? -2b40a dhg- ? -2b5a dhg- ? -2b6a dhg- ? -2b60a dhg- ? -2b7a dhg- ? -2b9a dhg- ? -2b10a dhg- ? -2b11a dhg- ? -2b12a model numbers graphic symbols 04 06 10 dhg- -2b ? b dhg- ? -2b2b dhg- ? -2b3b dhg- ? -2b4b dhg- ? -2b40b dhg- ? -2b5b dhg- ? -2b6b dhg- ? -2b60b dhg- ? -2b7b dhg- ? -2b9b dhg- ? -2b10b dhg- ? -2b11b dhg- ? -2b12b p a t x b y 101.6 (4.00) tank port " t " 7(.28) dia. through 11(.43) dia. spotface 2 places pressure port " p " 50 (1.97) pilot pressure port " x " pilot pressure port " y " cylinder port " b " cylinder port " a " 34.9(1.37) 69.8(2.75) 73(2.87) 91(3.58) 1.6 (.06) 50.4 (1.98) 34 (1.34) 11(.43) dia. through 17.5(.69) dia. spotface 4 places 3(.12) dia. two locating pins mounting surf ace (o-rings furnished) chain line indicates spring offset models (2b ? ) 65 (2.56) 204(8.03) 69.5 (2.74) 21 (.83) 48 (1.89) models with pilot choke valve models with stroke adj. ( r ? ) 35 (1.38) 4 (.16) 121(4.76) 91(3.58) 146 (5.75) 9.3 (.37) 10.4 (.41) 106 (4.17) 59 (2.32) pilot flow adjustment screw 6(.24) hex. 34 (1.34) fully extended dec. no.37 pilot operated directional valves dhg-04/06/10 dhg-04- ??? -50/5090 in addition to the standard two positions valves (2b ? ), the following two types of two positions valves are available: valves with neutral position and pilot y pressure position (2b ? a), valves with neutral position and pilot x pressure position (2b ? b). valves using neutral position and side position (special two position valve) note: for the valve mounting surface dimensions, see the dimensional drawing of the sharable sub-plate on page 26. for spring offset models (2b ? , 2b ? a b ), it functions as drain port. when that model is used, directly connect it to the reservoir. options dhg-04- ??? -c2 dimensions in millimetres (inches) outside dimensions are the same as those of the main valve of solenoid controlled pilot operated directional valves (dshg-04). see page 25.
directional controls mounting surface: iso 4401-ae-08-4-a mounting surface: iso 4401-af-10-4-a . . installation drawing 50.5 (1.99) pilot pressure port " y " pressure port " p " 130.2 53.2 (2.09) 13.5(.53) dia. through 20(.79) dia. spotface 6 places pilot pressure port " x " cylinder port " a " cylinder port " b " 77 (3.03) 156 (6.14) 13 (.51) 46.1 (1.81) 92.1 (3.63) 118 (4.65) indicates spring offset models (2b ? ). indicates spring offset models (2b ? a). 48 (1.89) 6 (.24) 142 (5.59) 41 (1.61) 6(.24) dia. two location pins mounting surf ace (o-rings furnished) 255 (10.04) 65 (2.56) 95 (3.74) 34 (1.34) 19.7 (.78) 59 (2.32) fully extended 190 (7.48) 230 (9.06) pilot flow adjustment screw 6 (.24) hex. indicates spring offset models (2b ? ). indicates spring offset models (2b ? a). 6(.24) dia. two location pins mounting surf ace (o-rings furnished) 384 (15.12) 65 (2.56) 159.5 (6.28) (2.62) 66.5 84 (3.31) 48 (1.89) 6 46 (1.81) 205 (8.07) 2-eye bolts (.24) pilot pressure port " x " cylinder port " a " cylinder port " b " 233.8 (9.20) 114.3 (4.50) 21.8 (.86) 78 (3.07) 43.1 (1.69) 79.4 (3.13) 158.8 (6.25) 198 (7.80) pilot pressure port " y " pressure port " p " tank port " t " tank port " t " 21.5(.85) dia. through 32(1.26) dia. spotface 6 places 43 (1.69) 77.5 (3.05) 190.5 (7.50) 76.2 (3.00) 19.6 (.77) (5.13) 52 (2.05) xa b 19.7 (.78) 127 (5.00) 167 (6.57) pilot flow adjustment screw 6 (.24) hex. 59 (2.32) fully extended dec. dec. no.38 pilot operated directional valves dhg-06 / 10 dhg-06- ??? -50/5090 dhg-10- ??? -40/4090 models with pilot choke valve dhg-06- ??? -c2 options models with pilot choke valve dhg-10- ??? -c2 options pressure centred models (3h ? ) models with stroke adjustment (r ? ) models with pilot piston (p ? ) the outside dimensions of the above options are the same as those of the main valve of solenoid controlled pilot operated directional valve (dshg-06). see page 25. pressure centred models (3h ? ) models with stroke adjustment (r ? ) models with pilot piston (p ? ) the outside dimensions of the above options are the same as those of the main valve of solenoid controlled pilot operated directional valves (dshg-10). see page 25. in case of spring offset model (2b ? , 2b ? a b ), it functions as a drain port. when that model is used, directly connect it to the reservoir. in case of spring offset model (2b ? , 2b ? a b ), in functions as a drain port. when that model is used, directly connect it to the reservoir. note: for the valve mounting surface dimensions, see the dimensional drawing of the sharable sub-plate in page 27. note: for the valve mounting surface dimensions, see the dimensional drawing of the sharable sub-plate in page 28. dimensions in millimetres (inches)
e directional controls spare parts list item name of parts 9 10 11 12 13 o-ring o-ring o-ring o-ring o-ring part numbers dhg-04 dhg-06 dhg-10 qty 2 4 2 2 4 so-nb-p9 so-nb-p22 so-nb-p34 so-nb-p9 so-nb-p9 so-nb-p14 so-nb-p30 so-nb-p40 so-nb-p10 so-nb-p9 so-nb-p20 so-nb-p42 so-nb-g65 so-nb-p14 so-nb-p9 valve model numbers seal kit numbers dhg-04- ??? -50/5090 dhg-06- ??? -50/5090 dhg-10- ??? -40/4090 ks-dhg-04-50 ks-dhg-06-50 ks-dhg-10-40 6 8 15 16 17 13 11 5 10 1 3 14 9 4 12 7 2 no.39 pilot operated directional valves dhg-04/06/10 dhg-04- ??? -50/5090 dhg-06- ??? -50/5090 dhg-10- ??? -40/4090 when making replacement of seals, please do it carefully after reading through the relevant instructions in the operator's manual. note: when ordering the o-rings, please specify the seal kit number from the table below. caution
directional controls 1. 2. 3. 4. 5. 6. 1 1 2 2 1 1 3 4 4 4 4 1 3 1 3 1 1 2 2 2 2 1 1 1 1 5 6 6 6 specifications dmt-03-3c ? -50 ? dmt-03-3d ? -50 ? dmt-03-2d ? -50 ? dmt-03-2b ? -50 ? dmt-06 ? -3d ? -30 ? dmt-06 ? -2d ? -30 dmt-06 ? -3c ? -30 ? dmt-10 ? -3c ? -30 ? dmt-10 ? -3d ? -30 ? dmt-10 ? -2d ? -30 dmg-01-3c ? -10 ? dmg-01-3d ? -10 ? dmg-01-2d ? -10 ? dmg-01-2b ? -10 ? dmg-03-3c ? -50 ? dmg-03-3d ? -50 ? dmg-03-2d ? -50 ? dmg-03-2b ? -50 ? dmg-04-3c ? -21 ? dmg-04-3d ? -21 ? dmg-04-2d ? -21 ? dmg-04-2b ? -21 ? dmg-06-3c ? -50 ? dmg-06-3d ? -50 ? dmg-06-2d ? -50 ? dmg-06-2b ? -50 ? dmg-10-3c ? -40 ? dmg-10-3d ? -40 ? dmg-10-2d ? -40 ? dmg-10-2b ? -40 ? model numbers 7 mpa (1020 psi) 14 mpa (2030 psi) 21 mpa (3050 psi) 31.5 mpa (4570 psi) max.operating pressure mpa (psi) max. t-line back pressure mpa (psi) approx. mass kg (lbs.) at time spool shift is required: 7 (1020) at time spool shift is not required: 21 (3050) at time spool shift is required: 7 (1020) at time spool shift is not required: 21 (3050) maximum flow l /min (u.s.gpm) 5.0 (11.0) 12.9 (28.5) 22 (48.5) 1.8 (4.0) 4.0 (8.8) 7.4 (16.3) 7.9 (17.4) 12 (26.5) 11.5 (25.4) 48.2 (106) 50 (110) 16 (2320) 14 (2030) 16 (2320) 21 (3050) 21 (3050) 21 (3050) 25 (3630) 21 (3050) 21 (3050) 25 (3630) 25 (3630) 21 (3050) 31.5 (4570) 31.5 (4570) 500 (132) 500 (132) 500 (132) 200 (52.8) 1100 (291) 1100 (291) 1100 (291) 200 (52.8) 100 (26.4) 100 (26.4) 100 (26.4) 100 (26.4) 300 (79.3) 300 (79.3) 100 (26.4) 300 {100} (79.3 {26.4}) 500 (132) 500 (132) 315 (83.2) 500 {315} (132 {83.2}) 35 (9.2) 100 (26.4) 100 (26.4) 100 (26.4) 100 (26.4) 105 (27.7) 200 (52.8) 200 (52.8) 50 (13.2) 500 (132) 500 (132) 500 (132) 250 (66.1) 1100 (291) 1100 (291) 1100 (291) 260 (68.7) 35 (9.2) 35 (9.2) 300 (79.3) 300 (79.3) 120 (31.7) 300 {120} (79.3 {31.7}) 500 (132) 500 (132) 315 (83.2) 500 {315} (132 {83.2}) 300 (79.3) 300 (79.3) 200 (52.8) 300 {200} (79.3 {52.8}) 500 (132) 500 (132) 315 (83.2) 500 {315} (132 {83.2}) 100 (26.4) 100 (26.4) 100 (26.4) 100 (26.4) 100 (26.4) 100 (26.4) 100 (26.4) 100 (26.4) 100 (26.4) 100 (26.4) 100 (26.4) 100 (26.4) 200 (52.8) 200 (52.8) 200 (52.8) 60 (15.9) 500 (132) 500 (132) 500 (132) 300 (79.3) 1100 (291) 1100 (291) 1100 (291) 350 (92.5) 100 (26.4) 100 (26.4) 100 (26.4) 100 (26.4) 200 (52.8) 200 (52.8) 200 (52.8) 90 (23.8) 500 (132) 500 (132) 500 (132) 420 (111) 1100 (291) 1100 (291) 1100 (291) 670 (177) threaded connections sub-plate mounting 05 0 14 10 0.5 1.0 1.5 500 100015002000 psi mpa 0 t-line back pressure 8 12 4 0 nm (in.lbf.) operating torque no.40 manually operated directional valves dmt- 03 / 06 / 10 dmg-01 / 03 / 04 / 06 / 10 thread connection / sub-plate mounting dmg-01 lever operating torque note: the maximum flow means the limited flow without inducing any abnormality to the operation (changeover) of the valve. for details, please refer to the "list of standard models and maximum flow" on pages 9 to 13. varies depending on the spool type. for details, see the "list of standard model and maximum flows" for dsg-03 series solenoid operated directional valves (catalogue no. pub ec-0403, at 50 hz rated voltage). the figures in parentheses indicate ma x. flow for 3c3, 3c5, 3c6 and 3c60. varies depending on the spool type. for the details, see the table in the following page. varies depending on the spool type. same as ds hg-10 (at pilot pressure of 1.5 mpa (220 psi). see page 13. lever operating torque varies depends on the t-line back pressure. see the right-hand figure. if the t-line back pressure exceeds 7 mpa (1020 psi), directly connect the drain port to the reservoir. specifications
directional controls e model number designation / others . max. operating pressure mpa (psi) rated flow l/min (u.s.gpm) model numbers dmf-10- ??? -30 ? dmf-16- ??? -31 ? 21 (3050) 315 (83.2) 400 (106) special seals for phos- phate ester type fluids (omit if not required) f: f- special seals dm series number t type of connec- tion manually operated direc- tional valves dm: threaded connec- tion t: sub-plate mounting g: -03 valve size -2 no. of valve position b spool-spring arragement 2 spool type 3 2 03 01 03 04 06 10 (piping size 3/4) 06 (piping size 1) 06x (piping size 1-1/4) 10 (piping size 1-1/2) 10x spring centred c: no-spring detented d: spring offset b: see the table below for combinations. 2 ? 3 4 ? 40 5 ? 6 60 ? 7 8 ? 9 10 ? 11 12 a special two position valve -50 design number a ,b (omit if not required) 50 30 30 10 50 21 50 ? design standard none: japanese std. "jis" 80: european design std. 90: n. american design std. none: japanese std. "jis" and euro- pean design std. 90: n. american design std. model numbers dmg-04-3c2 dmg-04-3c3 dmg-04-3c4 dmg-04-3c40 dmg-04-3c5 dmg-04-3c6 dmg-04-3c60 dmg-04-3c7 dmg-04-3c9 dmg-04-3c10 dmg-04-3c11 dmg-04-3c12 7 mpa(1020 psi) 14 mpa(2030 psi) 21 mpa(3050 psi) max. flow l/min (u.s.gpm) 200 180 200 200 80 90 140 200 200 200 200 200 (52.8) (47.6) (52.8) (52.8) (21.1) (23.8) (37.0) (52.8) (52.8) (52.8) (52.8) (52.8) 130 90 200 200 50 60 70 75 125 130 150 200 (34.3) (23.8) (52.8) (52.8) (13.2) (15.9) (18.5) (19.8) (33.0) (34.3) (39.6) (52.8) 85 70 90 105 40 55 55 55 100 85 85 95 (22.5) (18.5) (23.8) (27.7) (10.6) (14.5) (14.5) (14.5) (26.4) (22.5) (22.5) (25.1) spool type dmg-01 dmt-03 dmg-03 dmt-06 ? dmt-10 ? dmg-04 dmg-06 dmg-10 3c 3d 2d 2b 3c 3d 2d 2b 3c 3d 2d 2b 3c 3d 2d 2b 2 3 4 40 5 6 60 7 8 9 10 11 12 position #3 position #2 t g position #1 (#2, in case of dm -01/03-2b ? t g , dm -03-2d ? ) 40 manually operated directional valves dmt-03/06/10 dmg-01/03/04/06/10 no.41 model number designation yuken can offer flanged connection valves described below. for details, contact us. refer to column "valves using neutral position and side position" (special 2-position valve) on page 42. maximum flow of dmg-04-3c ? note: the mark indicate the spool type available for each type. graphic symbols list of spool type spring centred models (3c ? ) 3d ? 2d ? ab pt #1 #2 #3 no-spring detented models ab pt #1 #2 #3 ab p t #1 (#2) #3 spring offset models (2b ? ) ab p t #1 (#2) #3 position #2 is applied for models dmg-01-2b ? t g and dm -03-2b ? /2d ? .
directional controls valves using neutral position and side position . ab pt ab pt ab pt ab pt 2b2a 2b3a 2b4a 2b40a 2b5a 2b6a 2b60a 2b7a 2b8a 2b9a 2b10a 2b11a 2b12a 2b2b 2b3b 2b4b 2b40b 2b5b 2b6b 2b60b 2b7b 2b8b 2b9b 2b10b 2b11b 2b12b valve type valve type graphic symbols graphic symbols model model dmt-03 dmg-03 dmt-06 ? dmt-10 ? dmg-04 dmg-06 dmg-10 dmt-03 dmg-03 dmt-06 ? dmt-10 ? dmg-04 dmg-06 dmg-10 dmg-01 2d2a 2d3a 2d4a 2d40a 2d5a 2d6a 2d60a 2d7a 2d8a 2d9a 2d10a 2d11a 2d12a 2d2b 2d3b 2d4b 2d40b 2d5b 2d6b 2d60b 2d7b 2d8b 2d9b 2d10b 2d11b 2d12b valve type valve type graphic symbols graphic symbols model model dmt-06 ? dmt-10 ? dmg-04 dmg-06 dmg-10 dmt-06 ? dmt-10 ? dmg-04 dmg-06 dmg-10 dmg-01 in addition to the standard two positions valves (2d ? , 2b ? ), the following two types of two positions valves are available: valves with neutral position (#2) and position #1 (2b ? a, 2d ? a), valves with neutral position (#2) and position #3 (2b ? b, 2d ? b). the mark in the table below indicates the spool type available for each models. manually operated directional valves dmt-03/06/10 dmg-01/03/04/06/10 valves using neutral position and side position (special two position valve) spring ofset models no.42 position #2 position #1 position #3 position #2 no-spring detented models position #2 position #1 position #3 position #2 position number is determined with three position type (3c ? and 3d ? ) as the standard.
e directional controls sub-plates / mounting bolts / pressure drop valve model numbers japanese standard "jis" sub-plate model numbers thread size approx. mass kg (1bs.) sub-plate model numbers thread size approx. mass kg (1bs.) european design standard sub-plate model numbers thread size approx. mass kg (1bs.) n. american design standard dsgm-01-30 dsgm-01x-30 dsgm-01y-30 rc 1/8 rc 1/4 rc 3/8 0.8 0.8 0.8 (1.8) (1.8) (1.8) dsgm-01-3080 dsgm-01x-3080 1/8 bsp.f 1/4 bsp.f 0.8 0.8 (1.8) (1.8) dsgm-01-3090 dsgm-01x-3090 dsgm-01y-3090 1/8 npt 1/4 npt 3/8 npt 0.8 0.8 0.8 (1.8) (1.8) (1.8) dmg-01 dsgm-03-40 dsgm-03x-40 dsgm-03y-40 dmg-03 rc 3/8 rc 1/2 rc 3/4 3.0 3.0 4.7 (6.6) (6.6) (10.4) dsgm-03-2180 dsgm-03x-2180 dsgm-03y-2180 3/8 bsp.f 1/2 bsp.f 3/4 bsp.f 3.0 3.0 4.7 (6.6) (6.6) (10.4) dsgm-03-2190 dsgm-03x-2190 dsgm-03y-2190 3/8 npt 1/2 npt 3/4 npt 3.0 3.0 4.7 (6.6) (6.6) (10.4) dmg-04 dhgm-04-20 dhgm-04x-20 rc 1/2 rc 3/4 4.4 4.1 (9.7) (9.0) dhgm-04-2080 dhgm-04x-2080 1/2 bsp.f 3/4 bsp.f 4.4 4.1 (9.7) (9.0) dhgm-04-2090 dhgm-04x-2090 1/2 npt 3/4 npt 4.4 4.1 (9.7) (9.0) dmg-06 dhgm-06-50 dhgm-06x-50 rc 3/4 rc 1 7.4 7.4 (16.3) (16.3) dhgm-06-5080 dhgm-06x-5080 3/4 bsp.f 1 bsp.f 8.5 8.5 (18.7) (18.7) dhgm-06-5090 dhgm-06x-5090 3/4 npt 1 npt 7.4 7.4 (16.3) (16.3) dmg-10 dhgm-10-40 dhgm-10x-40 rc 1-1/4 rc 1-1/2 21.5 21.5 (47.4) (47.4) dhgm-10-4080 dhgm-10x-4080 1-1/4 bsp.f 1-1/2 bsp.f 21.5 21.5 (47.4) (47.4) dhgm-10-4090 dhgm-10x-4090 1-1/4 npt 1-1/2 npt 21.5 21.5 (47.4) (47.4) subplate model numbers page dsgm-01 ? dsgm-03 ? dhgm-04 ? dhgm-06 ? dhgm-10 ? 18 47 26 27 28 valve model numbers japanese standard "jis" european design standard n. american design standard qty. tightening torque nm (in. 1bs.) socket head cap screw dmg-01 dmg-03 dmg-04 dmg-06 dmg-10 m5 45 lg. m6 35 lg. m6 40 lg. m10 45 lg. m12 60 lg. m20 75 lg. no. 10-24 unc 1-3/4 lg. 1/4-20 unc 1-3/4 lg. 1/4-20 unc 1-1/2 lg. 3/8-16 unc 1-3/4 lg. 1/2-13 unc 2-1/2 lg. 3/4-10 unc 3 lg. 4 4 2 4 6 8 5-7 (44-62) 12-15 12-15 58-72 (106-133) (106-133) (513-637) 100-123 (885-1089) 473-585 (4195-5177) viscosity ssu factor 0.81 0.87 0.96 1.03 1.09 1.14 1.19 1.23 1.27 1.30 77 98 141 186 232 278 324 371 417 464 2 mm /s 15 20 30 40 50 60 70 80 90 100 p a b t p b a t p t pressure drop curve number spool type 2 3 4 40 5 6 60 7 8 9 10 11 12 2 3 2 2 3 3 3 2 2 3 2 3 2 2 2 3 2 2 2 2 2 2 2 2 2 2 3 2 2 2 3 3 2 2 3 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 1 1 50 100 150 200 300 250 0.2 0.4 0.6 0.8 1.0 0 0 20 40 60 80 0 0 50 100 150 1 2 3 mpa psi pressure drop p l/min u.s.gpm flow rate no.43 sub-plates sub-plates are available. specify the sub-plate model number from the table above. when sub-plates are not used, the mounting surface should have a good machined finish. manually operated directional valves dmg-01/03/04/06/10 dmt-06 sharable with solenoid operand directional valves and solenoid controlled pilot operated directional valves. for dimensions, refer to the right table then see the corresponding pages. sub-plate dimensions appearing page mounting bolts pressure drop 2 the following characteristics are based on the following conditions: viscosity of the fluid: 35 mm /s (164 ssu) and specific gravity: 0.850 for any other viscosity, multiply the factors in the table below. for any other specific gravity (g'), the pressure drop ( p') may be obtained from the formula below. p' = p (g'/g) where, p is a value on the following chart and g is 0. 850. dmt-06, 06x instructions avoid connecting the tank port "t" to a line with possible surge pressure.
directional controls pressure drop p a b t p b a t p t pressure drop curve number spool type 2 3 4 40 5 6 60 7 8 9 10 11 12 3 3 3 3 3 3 3 3 3 3 3 3 3 2 2 2 2 2 3 3 2 2 2 2 2 3 3 3 3 3 3 3 3 3 3 3 3 3 2 2 2 2 2 3 3 2 2 2 2 2 2 1 1 p a b t p b a t p t pressure drop curve number 3 3 3 3 2 1 3 3 3 3 3 3 2 3 3 3 3 1 1 3 3 3 3 2 3 3 3 3 1 1 3 3 3 3 3 3 3 3 3 3 3 1 1 3 3 3 3 3 2 3 3 2 3 3 2 3 3 3 3 3c ? valve type 3c2 3d ? 3d2 2d ? 2d2 2b ? 3c3 3c4 3c40 3c5 3c60 3c7 3c8 3c9 3c10 3c11 3c12 3d3 3d4 3d40 3d5 3d60 3d7 3d8 3d9 3d10 3d11 3d12 2d3 2d7 2d8 2b8 2b3 2b2 p a b t p b a t p t pressure drop curve number spool type 2 3 4 40 5 6 60 7 9 10 11 12 5 6 5 5 5 2 2 5 6 5 5 5 2 3 4 4 2 3 3 2 2 4 4 3 5 6 5 5 4 4 4 5 6 5 5 5 4 5 5 5 5 2 2 5 5 5 5 5 3 1 1 1 model number dmt-03 dmg-03 dmg-06 dmg-10 same as dsg-03 series solenoid operated directional valves (standard type) same as solenoid controlled pilot operated directional valves (dshg-06) same as solenoid controlled pilot operated directional valves (dshg-10) catalogue no. pub. ec-0403 page 16 16 remarks 3d ? is same as 3c ? pressure drop characteristics 1 100 200 300 400 500 0.2 0 0 0.4 0.6 0.8 1.0 0 50 100 150 20 0 40 60 80 100 120130 psi l/min u.s.gpm flow rate mpa pressure drop p 2 3 0 5 10 15 20 25 30 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 35 0 24689 1 2 3 200 100 50 0 150 psi l/min u.s.gpm flow rate mpa pressure drop p 0 50 100 150 200 0.2 1 2 3 4 5 6 0.4 0.6 0.8 1.0 1.2 0 psi l/min u.s.gpm mpa pressure drop p 175 150 100 50 0 0 1020304050 flow rate no.44 manually operated directional valves dmt-10 dmg-01/04 dmt-10, 10x dmg-01 dmg-04 for dmt-03 , dmg-03 , dmg-06 , and dmg-10 , refer to the table below then see the related page.
directional controls e 1. installation drawing 1 model numbers "c" thd. rc 3/8 3/8 bsp.f 3/8 npt dmt-03- ??? -50 dmt-03- ??? -5080 dmt-03- ??? -5090 model numbers "h" thd. rc 3/4 rc 1 dmt-06- ??? -30 dmt-06x- ??? -30 3/4 bsp.f 1 bsp.f 3/4 npt 1 npt rc 1-1/4 rc 1-1/2 1-1/4 bsp.f 1-1/2 bsp.f 1-1/4 npt 1-1/2 npt dmt-06- ??? -3080 dmt-06x- ??? -3080 dmt-06- ??? -3090 dmt-06x- ??? -3090 dmt-10- ??? -30 dmt-10x- ??? -30 dmt-10- ??? -3080 dmt-10x- ??? -3080 dmt-10- ??? -3090 dmt-10x- ??? -3090 model no. dmt-06 dmt-06x dmt-10 dmt-10x 50 (1.97) 30 (1.18) 126 (4.96) 47.5 (1.87) 24 (.94) 66 (2.60) 40 (1.57) 160 (6.30) 62.5 (2.46) 33 (1.30) 320 (12.60) 402 (15.83) 255 (10.04) 320 (12.60) 137 (5.39) 173 (6.81) 118 (4.65) 147 (5.79) 107 (4.21) 135 (5.31) 33.5 (1.32) 40 (1.57) 86 (3.39) 102 (4.02) 76 (2.99) 90 (3.54) 9 (.35) 12.5 (.49) 40 (1.57) 50 (1.97) 25 (.98) 35 (1.38) 250 (9.84) 300 (11.81) 100 (3.94) 120 (4.72) 63.5 (2.50) 78.5 (3.09) 12 (.47) 15 (.59) 11 (.43) 13.5 (.53) 17.5 (.69) 21 (.83) cdefhj klnqsu y xzabdefg v dimension mm (inches) ab p t 30 30 30 30 30 soc. hd. cap screw 4 (.16) hex. soc. 3 0 2 0 20 r94.5 (r3.72) position #3 position #2 position #1 27 (1.06) 85.3 (3.36) 19 (.75) 92 (3.62) 46.3 (1.82) 139 (5.47) 26.8 (1.06) 21.8 (.86) 74.5 (2.93) 27 (1.06) 39.7 (1.56) 25 (.98) dia. cylinder port " a " " c " thd. 69.7 (2.74) 54 (2.13) cylinder port " b " " c " thd. tank port " t " " c " thd. pressure port " p " " c " thd. 7(.28) dia. through 11(.43) c' bore 4 places 46 (1.81) 12 (.47) 70 (2.76) 2 (0.8) 48.7 (1.92) 108.5 (4.27) 193.8 (7.63) 44 (1.73) 27 (1.06) 10 (.39) x x stroke d b y z s s l q n k j u v position #3 neutral position #2 position #1 40 (1.57) dia. c c d r " e " h f f e cylinder port " a " pressure port " p " cylinder port " b " "f" dia. through "g" dia. spotface 4 places tank port " t " a "h" thd. 4 places 27 (1.06) no.45 manually operated directional valves dmt-03 / 06 / 10 dmt-03- ??? -50/5080/5090 dmt-06, 06x- ??? -30/3080/3090 dmt-10, 10x- ??? -30/3080/3090 how to change lever position: the lever position can be changed to any position in five different positions shown on the sketch in the right. for the lever position change, remove the soc. hd. cap screw and lever once, set the lever at the required position and tighten it with the soc. hd. cap screw firmly. lever operating torque: not exceeding 30 nm (266 in. 1bs.) dimensions in millimetres (inches) dimensions in millimetres (inches)
directional controls mounting surface: iso 4401-ab-03-4-a installation drawing 71 (2.80) 40.5 (1.59) 11 (.43) 17(.67):3d ? ,2d ? ,2b ? 22(.87):3c ? 31 (1.22) 32.5 (1.28) 15.5 (.61) 0.75 (.03) cylinder port " a " pressure port " p " 5.5(.22) dia. through 9.5(.37) dia. c' bore 4 places r49 (r1.93) cylinder port " b " tank port " t " the operating lever position can be adjusted as required on the circumference by loosening the set screw. neutral position #2 position #3 position #1 2 7 2 7 5 (.20) 48 (1.89) 74 (2.91) 39 (1.54) 25 (.98) 65 (2.56) 38 (1.50) 50.5 (1.99) mounting surf ace (o-rings furnished) 26 (1.02) dia. lever fixing screw 2.5 (.10) hex. soc. 20 (.79) dia. four positions are available in 90 increment. no.46 manually operated directional valves dmg-01 dmg-01- ??? -10/1090 note: for the valve mounting surface dimensions, see the dimensional drawing of the sharable sub-plate in page 18. dimensions in millimetres (inches)
directional controls e mounting surface: iso 4401-ac-05-4-a 3 installation drawing 1. 2. 3. 1 sub-plate model numbers piping size " c " thd. " d " thd. efhjklnpqst dimensions mm (inches) dsgm-03-40 dsgm-03-2180 dsgm-03-2190 dsgm-03x-40 dsgm-03x-2180 dsgm-03x-2190 dsgm-03y-40 dsgm-03y-2180 rc 3/8 3/8 bsp.f 3/8 npt rc 1/2 rc 3/4 1/2 bsp.f 1/2 npt 3/4 bsp.f dsgm-03y-2190 3/4 npt m6 1/4-20 unc m6 1/4-20 unc m6 1/4-20 unc 13 (.51) 15 (.59) 110 (4.33) 13 (.51) 15 (.59) 13 (.51) 15 (.59) 110 (4.33) 120 (4.72) 9 (.35) 9 (.35) 14 (.55) 10 (.39) 10 (.39) 15 (.59) 32 (1.26) 32 (1.26) 50 (1.97) 62 (2.44) 62 (2.44) 80 (3.15) 40 (1.57) 40 (1.57) 45 (1.77) 16 (.63) 16 (.63) 10 (.39) 48 (1.89) 48 (1.89) 47 (1.85) 21 (.83) 21 (.83) 16 (.63) 24 (.94) 24 (.94) 42 (1.65) p b a t 6.4 (.25) 27 (1.06) 16.7 (.66) 90 (3.54) 18 (.71) j 8.8 (.35) dia. through 14 (.55) dia. spotf ace 4 places 22 (.87) 10 (.39) 20 (.79) " d " thd. " e " deep 4 places 21.4 (.84) 32.5 (1.28) 46 (1.81) 90 (3.54) 92 (3.62) h f 70 (2.76) 110 (4.33) 11 (.43) dia. 4 places 3.2 (.13) 37.3 (1.47) 54 (2.13) 7 (.28) t k l n p s q 76 (2.99) " c " thd. 4 places cylinder port " a " pressure port " p " cylinder port " b " 7(.28) dia. through 11(.43) dia. spotface 4 places tank port " t " 32.5 (1.28) 12 (.47) 70 (2.76) 69.7 (2.74) 54 (2.13) 48.7 (1.92) 50.8 (2.00) 108.5 (4.27) 193.8 (7.63) 74.5 (2.93) 27 (1.06) 39.7 (1.56) 25 (.98) dia. 27 (1.06) 59 (2.32) 2 (.08) 76.3 (3.00) 19 (.75) 92 (3.62) 46.3 (1.82) 139 (5.47) r94.5 (r3.72) position #3 position #2 position #1 3 0 2 0 2 0 mounting surf ace (o-rings furnished) 46 (1.81) no.47 manually operated directional valves dmg-03 sub- plates dsgm-03 ? -40/2180/2190 although the tank port is shown on the left in our sub-plate either may be used. the position of operating lever can be changed as required. for the detail, see the dmt-03 in the previous page. lever operating torque: not exceeding 30 nm (266 in. 1bs.) dmg-03- ??? -50/5090 dimensions in millimetres (inches) view arrow x x
directional controls mounting surface: iso 4401-ad-07-4-a mounting surface: iso 4401-ae-08-4-a installation drawing a b t p y xa b 32 (1.26) 32 (1.26) 50 (1.97) 232.5 (9.15) 202.5 (7.97) 22.5 (.89) 59.2 (2.33) 1.5 (.06) 10.1 (.40) 34.9 (1.37) 69.8 (2.75) 72.9 (2.87) 90 (3.54) 101.6 (4.00) 34 (1.34) 130 (5.12) cylinder port " b " pressure port " p " tank port " t " 11(.43) dia. through 17.5(.69) dia. spotface 4 places drain port " y " cylinder port " a " 7(.28) dia. through 11(.43) dia. spotface 2 places position #1 position #2 position #3 r200 (r7.87) chain line indicates spring offset models (2b ? ,2b ? a). 30 (1.18) mounting surf ace (o-rings furnished) 50 (1.97) 4 (.16) 3(.12) dia. two locating pins 32 (1.26) 103 (4.06) 30 (1.18) 40 (1.57) dia. pressure port " p " tank port " t " drain port " v " 300.5 (11.83) 13.5(.53) dia. through 20(.79) dia. spotface 6 places 95.8 (3.77) 130.2 (5.13) 53.2 (2.09) 55.8 (2.20) 77 (3.03) 13 (.51) 92.1 (3.63) 118 (4.65) 46.1 (1.81) cylinder port " b " cylinder port " a " 260.5 (10.26) 57 (2.24) 57 (2.24) position #2 position #3 position #1 r200 (r7.87) 34 (1.34) 52 (2.05) 116 (4.57) 156 (6.14) 12.5 (.49) mounting surf ace (o-rings furnished) 40 (1.57) 47 (1.85) 41 (1.61) 6 (.24) 6(.24) dia. two locating pins 40 (1.57) dia. 30 (1.18) indicates spring offset models (2b ? ). indicates spring offset models (2b ? a). 14.2 (.56) no.48 manually operated directional valves dmg-04 / 06 dmg-04- ??? -21/2190 dmg-06- ??? -50/5090 note: for the valve mounting surface dimensions, see the dimensional drawing of the sharable sub-plate in page 27. note: for the valve mounting surface dimensions, see the dimensional drawing of the sharable sub-plate in page 26. dimensions in millimetres (inches)
directional controls e mounting surface: iso 4401-af-10-4-a installation drawing ab x t p y cylinder port " a " pressure port " p " cylinder port " b " 21.5(.85) dia. through 32(1.26) dia. spotface 6 places tank port " t " drain port " v " 19.6 (.77) 79.4 (3.13) 158.8 (6.24) 198 (7.80) 76.2 (3.00) 146.5 (5.77) 453 (17.83) 190.5 (7.50) 401 (15.79) 94.5 (3.72) 114.3 (4.50) 66.5 (2.62) 47.5 (1.87) 105 (4.13) 105 (4.13) position #3 position #2 position #1 r300 (r11.81) 40 (1.57) dia. 36 (1.42) two eye bolts m8 indicates spring offset models (2b ? ) indicates spring offset models (2b ? a) 180 (7.09) 60 (2.36) 65 (2.56) 21.5 (.85) 233.8 (9.20) mounting surf ace (o-rings furnished) 6(.24) dia. two locating pins 44.5 (1.75) 6 (.24) no.49 manually operated directional valves dmg-10 note: for the valve mounting surface dimensions, see the dimensional drawing of the sharable sub-plate in page 28. dimensions in millimetres (inches) dmg-10- ??? -50/5090
directional controls spare parts list 21 22 23 item name of parts o-ring o-ring o-ring part numbers so-nb-p18 so-na-p6 so-nb-p9 qty. 3 1 4 14 15 18 item name of parts o-ring o-ring o-ring part numbers so-nb-p21 so-na-p8 so-nb-a014 qty. 2 2 5 16 back up ring so-bb-p8 2 17 o-ring so-nb-a023 1 valve model numbers dmt-03- ??? -50/5080/5090 dmg-03- ??? -50/5090 seal kit numbers ks-dmt-03-50 ks-dmg-03-50 x 14 13 9 12 18 10 17 15 16 21 22 25 24 20 x 19 3 8 6 5 23 2 1 21 11 4 20 3 14 29 30 10 9 2 6 21 1 5 18 8 14 4 28 27 13 24 23 26 17 25 11 13 22 15 16 12 no.50 manually operated directional valves dmg-01/03 dmt-03 dmg-01- ??? -10/1090 when making replacement of seals, please do it carefully after reading through the relevant instructions in the operator's manual. note: when ordering the o-ring, please specify the seal kit number (ks-dmg-01-10). dmt-03- ??? -50/5080/5090 dmg-03- ??? -50/5090 note: o-rings of item 18 are not used for dmt-03. when ordering the seals, please specify the seal kit number from the table right. section x-x caution 1. 2.
e directional controls spare parts list item name of parts dmt-06 ? dmt-10 ? qty. part numbers packing dust seal 24 25 upi 32 40 6y ?? dki 32 44 7 10 ?? ? upi 40 55 10y ?? dki 40 52 7 10 ?? ? 2 1 item name of parts dmg-04 dmg-10 qty. part numbers dmg-06 29 30 31 32 33 o-ring o-ring o-ring o-ring o-ring so-nb-p34 so-nb-p22a so-na-p20 so-nb-p9 so-nb-p9 so-nb-p40 so-nb-p30 so-na-p20 so-nb-p14 so-nb-p10 so-nb-g65 so-nb-p42 so-na-p25 so-nb-p20 so-nb-p14 2 4 2 1 2 7 21 13 14 15 23 16 2 4 17 1 26 24 22 5 12 25 6 18 19 20 3 28 26 9 22 31 22 8 15 28 24 7 23 a 21 2 11 29 32 30 25 29 3 20 a 10 33 36 17 1 6 33 no.51 manually operated directional valves dmt-06/10 dmg-04/06/10 when making replacement of seals, please do it carefully after reading through the relevant instructions in the operator's manual. dmt-06, 06x- ??? -30/3080/3090 dmt-10, 10x- ??? -30/3080/3090 note: when ordering the seals, please specify the seal kit number from the table below. dmt-06 ? - ??? -30/3080/3090 valve model numbers dmt-10 ? - ??? -30/3080/3090 dmg-04 ? - ??? -21/2190 dmg-06 ? - ??? -50/5090 dmg-10- ??? -40/4090 ks-dmt-06-30 seal kit numbers ks-dmt-10-30 ks-dmg-04-21 ks-dmg-06-50 ks-dmg-10-40 list of seal kits dmg-04- ??? -21/2190 dmg-06- ??? -50/5090 dmg-10- ??? -40/4090 note: when ordering the seals, please specify the seal kit number from the table right. section a-a caution

▲Up To Search▲

Price & Availability of DSHG-01

	To Download DSHG-01 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .